Panasonic AG-AC160AP Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Panasonic AG-AC160AP. Panasonic AG-AC160AP 42 stron. Broadcast-grade camera recorder with 22x zoom lens and 2.2 megapixel u.l.t. image sensor
Również dla Panasonic AG-AC160AP: Skrócona instrukcja obsługi (1 strony)

Drukuj stronę

For AG-AC160AEN Only

Caution for AC Mains Lead

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable, Type C and Type BF.

Appropriate mains cable must be used in each local area, since the other type of mains cable is

not suitable.

TYPE C

For AG-AC160AEJ/AG-AC160AEN Only

EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS

1. Applicable standards and operating environment

The apparatus is compliant with:

• standards EN55103-1 and EN55103-2 2009, and

• electromagnetic environments E1, E2, E3 and E4.

2. Pre-requisite conditions to achieving compliance with the above standards

<1> Peripheral equipment to be connected to the apparatus and special connecting cables

• The purchaser/user is urged to use only equipment which has been recommended by us as

peripheral equipment to be connected to the apparatus.

• The purchaser/user is urged to use only the connecting cables described below.

<2> For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.

• Video signal connecting cables

Use double-shielded coaxial cables, which are designed for 75-ohm type high-frequency ap-

plications, for SDI (Serial Digital Interface).

Coaxial cables, which are designed for 75-ohm type high-frequency applications, are recom-

mended for analog video signals.

• Audio signal connecting cables

If your apparatus supports AES/EBU serial digital audio signals, use cables designed for AES/EBU.

Use shielded cables, which provide quality performance for high-frequency transmission ap-

plications, for analog audio signals.

• Other connecting cables (IEEE1394, USB)

Use double-shielded cables, which provide quality performance for high-frequency applica-

tions, as connecting cables.

• When connecting to the DVI signal terminal, use a cable with a ferrite core.

• If your apparatus is supplied with ferrite core(s), they must be attached on cable(s) following

instructions in this manual.

3. Performance level

The performance level of the apparatus is equivalent to or better than the performance level

required by these standards.

However, the apparatus may be adversely affected by interference if it is being used in an EMC

environment, such as an area where strong electromagnetic fields are generated (by the presence

of signal transmission towers, cellular phones, etc.). In order to minimize the adverse effects of the

interference on the apparatus in cases like this, it is recommended that the following steps be taken

with the apparatus being affected and with its operating environment:

1. Place the apparatus at a distance from the source of the interference.

2. Change the direction of the apparatus.

3. Change the connection method used for the apparatus.

4. C onnect the apparatus to another power outlet where the power is not shared by any other appliances.

AC adaptor (Battery charger)

TYPE BF

indicates safety information.