Panasonic AG-DVC200E Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Panasonic AG-DVC200E. Panasonic AG-DVC200E 44 stron. Digital video camera recorder

Drukuj stronę
Viewfinder displays
Display item
G Calendar/clock status
switching display
H Remaining
tape/recording inhibit
display
I Safety zone markers
J Cause of !LED
lighting display
(this item appears
only during a MODE
check)

Selecting the viewfinder screen display

1
Extender display
2
INTERVAL REC status display
3
Time code display
4
Centre marker
5
Message display
6
IRIS MODE switch status display
7
QUICK FOCUS display
8
Shutter speed display
9
LOW LIGHT warning display
:
AUDIO sampling frequency display
;
Audio level meter display
<
VTR warning display/voltage warning display
=
FULL AUTO/SCENE FILE display
>
AWB colour temperature fine adjustment amount display
?
Zoom display
@
AWB colour temperature display
A
ATW, AWB channel display
B
F value display
C
Gain display
D
Filter display
E
Calendar/clock display
F
Voltage display, BAR display
G
Calendar/clock status switching display
H
Remaining tape/recording inhibit display
I
Safety zone markers
What is displayed
D
¢¢¢min
= END
= INH
IND+003
Corner
: 3 types
Box
: 3 types
16:9 full box : 3 types
SUPER-V
EXT ON
FIL No1
FIL wo No1
FIL NG
SHUT wo 1/100
SHUT ON
WHITE ATW
WHITE PRE
GAIN wo 0dB
Status displayed
when the
corresponding
status is
established
Status causing the display to appear
"D" is displayed only when a VF DISPLAY setting has been selected. This is
to enable the user to differentiate between the screen displays when
"TIME+DATE" (see page 36) has been selected as the TIME/DATE setting
on <VF DISPLAY 2/2> and when "REC" has been selected as the TIME
STAMP setting (see page 34) on <VTR OPTION>.
Normally, "¢¢¢min" is lit, and it flashes when the tape is nearly at its end.
When the tape reaches the end, " = END" lights.
When recording is inhibited, " = INH" lights.
This lights during an INDEX search. A positive number denotes an index
count in the forward direction, and a negative number denotes an index
count in the reverse direction.
decremented to zero, and when the tape stops, the remaining tape display is
restored.
The safety zone markers selected for 01 through 09 in SAFETY ZONE are
displayed. For further details, refer to the table for "SAFETY ZONE" (page
35) on the <MARKER/ZEBRA> sub-menu.
Displayed when SUPER-V is set to ON.
Displayed when EXTENDER is set to ON.
Displayed when FILTER is set to 1.
Displayed when FILTER is set to a number other than 1.
Displayed when FILTER is set to NG.
Displayed when SHUTTER is set to a speed other than 1/100.
Displayed when SHUTTER is set to ON.
Displayed when ATW has been selected for AWB.
Displayed when the AWB switch has been set to PRE.
Displayed when a gain value other than 0 dB has been selected.
Display/non-
display selected
by
MARKER/ZEBRA
≤
–
≤
–
–
–
≤
–
≤
–
≤
–
≤
–
≤
–
≤
–
–
–
–
–
≤
–
≤
–
≤
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
≤
–
–
–
≤
–
19 (E)
With each detection, the value is
Display/non-
display selected
Displayed and
by VF DISPLAY
can be cleared
1/2 or 2/2
≤
≤
–
–
≤
≤
≤
–
–
–
≤
≤
–
–
≤
≤
≤
≤
≤
≤
≤
≤
–
–
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
≤
–
–
≤
≤
≤
–
Displayed
during playback
–
–
≤
–
–
–
–
–
–
≤
≤
≤
–
–
–
–
–
–
–
–
–
–
–
–
–