Panasonic AG-HPX250EJ Instrukcja obsługi - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Panasonic AG-HPX250EJ. Panasonic AG-HPX250EJ 36 stron. Memory card camera recorder
Również dla Panasonic AG-HPX250EJ: Regulacja elektryczna (20 strony)
Drukuj stronę
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
Using the AC adaptor
Installation
1
Insert the DC cable's battery connector
until it clicks into place.
2
Connect the AC power supply cable.
Connect the AC power supply cable in the
order 1 and 2 .
DC cable's
battery connector
Insert it all the
way in.
1
2
Removal
1
Set the POWER/MODE switch to OFF, and
check that the mode lamp is off.
(Page E-24)
2
While pressing the battery release button,
raise up the battery to remove it.
• Support the battery with your hand to ensure
that it will not fall.
Battery release button
Removal
1
Set the POWER/MODE switch to OFF, and
check that the mode lamp is off.
(Page E-24)
2
Remove the DC cable's battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cord from
the power outlet.
• Disconnect the AC power supply cable from
the power outlet when the unit is not going to
be used.
• When the AC power supply cable is
disconnected from the power outlet, the power
lamp on the AC adaptor remains lit for a while
then shuts off. This is not a malfunction.
Mode lamps
E-20