Panasonic AGDVC30 - 3 CCD DV CAMCORDER Menu informacyjne - Strona 11

Przeglądaj online lub pobierz pdf Menu informacyjne dla Kamera Panasonic AGDVC30 - 3 CCD DV CAMCORDER. Panasonic AGDVC30 - 3 CCD DV CAMCORDER 15 stron. Mini-dv camera-recorder (ntsc)
Również dla Panasonic AGDVC30 - 3 CCD DV CAMCORDER: Specyfikacje (8 strony), Podręcznik użytkownika (21 strony), Broszura i specyfikacje (10 strony)

Drukuj stronę

Menu configuration

RECORDING SETUP screen

Item/

(Display

Description of settings

mode)

TCG

Use this to set the mode in which to

(CAMERA)

advance the time code.

(VCR)

FREE RUN:

The time code is advanced continuously

regardless of the operation mode.

It is recorded on the basis of the time

appearing on the camera-recorder's

calendar clock.

REC RUN:

The time code is advanced only when

recording is underway.

It is recorded while ensuring that

continuity is maintained with the time

code already recorded on the tape when

shooting with frame-to-frame continuity.

FIRST REC TC

Use this to select the time code to be

(CAMERA)

recorded when recording is started.

(VCR)

REGEN:

Select this to record the time code that

will ensure continuity with the time code

already on the tape.

The time code is recorded in the REC

RUN mode regardless of the setting

selected for the TCG item.

PRESET:

Select this to record the time code using

the value selected by the TC PRESET

item as the initial value.

However, when shooting with frame-to-

frame continuity has taken place, the

time code is recorded to ensure

continuity with the time code already on

the tape.

TC PRESET

Use this to set the initial value of the time

(CAMERA)

code to be recorded.

(VCR)

The item takes effect when "PRESET" has

been selected as the FIRST REC TC item

setting.

1394 UB

Use this to select the user's bit to be

REGEN

recorded when recording the signals of the

(VCR)

unit connected to the DV connector.

OFF:

The user's bit selected by the UB MODE

item is recorded.

ON:

The user's bit of the signals input to the

DV connector is recorded.

O When "ON" has been selected as this

item's setting, it takes precedence over

the UB MODE item setting.

O If the signals do not contain the user's bit

information, the user's bit is not

recorded.

O If no signals are input to the DV

connector, the UB MODE item setting is

used for the recording.

(cont.)

UB MODE

(CAMERA)

(VCR)

UB PRESET

(CAMERA)

(VCR)

ONE-SHOT

REC

(CAMERA)

REC TIME

(CAMERA)

The underlining indicates the factory setting.

Item/

(Display

Description of settings

mode)

Use this to set what is to be recorded as

the user's bit.

USER:

The user's information is recorded.

TIME:

The recording time is recorded.

DATE:

The recording date is recorded.

TCG:

The time code is recorded.

Use this to set the user's bit.

For this, however, "USER" must have been

selected as the UB MODE item setting.

Use the ON setting when shooting on a

frame-by-frame basis.

OFF:

Frame-by-frame

performed.

ON:

The camera-recorder is set to the frame-

by-frame shooting mode.

When the START/STOP button is

pressed, recording proceeds for the

number of seconds selected by the REC

TIME item setting, and then the camera-

recorder is set to the REC PAUSE

mode.

Use this to set the recording time for frame-

by-frame shooting.

0.5s : 0.5 sec.

1.5s : 1.5 sec.

shooting

not

1s : 1.0 sec.

2s : 2.0 sec.