AquaScape 91016 Instrukcja i konserwacja - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja i konserwacja dla Pompa wodna AquaScape 91016. AquaScape 91016 16 stron. Pond pump
Drukuj stronę
Contents
No.
Description
1.
Foaming Jet Fountain Head
2.
Waterbell Fountain Head
3.
Daisy Fountain Head
4.
Fountain Riser Stem ¾" O.D. X 3.5"L (4)
5.
Diverter Valve
6.
Multi-Hose Adapter Hosetail (size varies by pump model)
7.
Top Cover
8.
Clips (3)
9.
Water Chamber Cover
10.
Impeller Kit
11.
Water Pump
12.
Mounting Bracket(s) & Screws (configuration varies by model)
13.
Bottom Cover
11
10
Safety Information
WARNING: Risk of electric shock – This pump
has not been approved for use in swimming pool
or marine areas
WARNING: To provide continued protection
against risk of electric shock, connect to properly
grounded, ground fault circuit interrupter (GFCI)
outlets only, using the following guidelines:
(A) Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use and
protected from snow and rain.
(B) Inspect cord before using.
(C) Do not use extension cords.
(D) Any wiring of pumps should be performed by a
qualified electrician to ensure code compliance and
user safety.
☎
aquascapeinc.com |
CAN (866) 766-3426 |
(Part varies per model. 1300 shown)
9
☎
US (866) 877-6637
6
5
7
12
13
(E) Unplug pump at receptacle outlet when not in use or
before removal from pond.
(F) To reduce risk of electrical shock, all wiring and
junction connections should be made per local codes.
Requirements may vary depending on usage and
location.
(G) The power cable should be protected at all times to
avoid punctures, cuts,
bruises, and abrasions.
(H) Never handle power
cords with wet hands.
(I)
Do not remove cord
and strain relief. Do
not connect conduit to
pump.
(J) Do not use power
cable to lift pump.
3
2
1
4
8
3