AquaScape AquaForce 1500 GPH Instrukcja instalacji i konserwacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Pompa wodna AquaScape AquaForce 1500 GPH. AquaScape AquaForce 1500 GPH 16 stron. Solids handling pump
Drukuj stronę5) routine Maintenance
5.1 Routine Maintenance
• Your Aquascape™ AquaForce™ Pump should operate under continuous duty without any
major maintenance.
• If any reduction in flow is noticed, unplug the pump and remove it from the pond. Depress-
ing the two clips on the front of the pump will allow access to the main pump chamber.
Remove any debris, and if required, remove the Pump Volute Outlet by turning counter-
clockwise and pulling off. Inspect the Solids Handling Impeller for blockage.
5.2 Annual Maintenance
• Remove and inspect the impeller by depressing the tabs and removing the Upper Pump
Housing. Remove the Pump Volute Outlet by turning it counter-clockwise. Inspect the
Solids Handling Impeller for damage and replace if necessary.
5.3 Winter Storage
• In most climates, your Aquascape™ AquaForce™ Pump may operate year-round.
• If operated year round, we recommend moving the pump from the bottom of the pond to a
higher level to avoid disturbing the thermal layers in the pond.
• If not operating the pond year-round, we recommend removing the pump from the pond
and placing in a bucket of pond water in a frost-free location.
6) Using the Pump as a Winter device
• The Aquascape™ AquaForce™ Pump can be used to keep a hole open in the ice so that
proper gas exchange can orrur.
• Place the pump on the first or second shelf of the pond and extend the discharge so that it
is a few inches below the water level.
• When plugged in, the pump should agitate the surface of the water, ensuring that a hole
stays open in the ice.
• During periods of extreme cold an "ice dome" may form over the pump. If this happens it
may be necessary to open up the hole in the ice.
7