AquaScape 96030 Instrukcje i konserwacja - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje i konserwacja dla Systemy filtracji wody AquaScape 96030. AquaScape 96030 20 stron. Automatic dosing systems for ponds/ fountains
Również dla AquaScape 96030: Instrukcja obsługi i konserwacji (20 strony), Instrukcje i konserwacja (16 strony), Instrukcja obsługi i konserwacji (20 strony)
Drukuj stronę
Introduction
The Aquascape Automatic Dosing System when used in conjunction with the Aquascape Automatic Dosing System
water treatments will provide pond and water feature owners with optimum water conditions and crystal-clear water. The
Aquascape Automatic Dosing System was designed to take the guesswork and mundane chore out of adding water
treatments to your pond or fountain on a consistent and regular basis. Adding water treatments consistently and often
ensures pristine water conditions and optimizes water conditions for pond inhabitants. This Instruction Manual will guide both
your installation of this filter and recommended maintenance procedures to ensure long-term effectiveness.
Contents
No.
Description
1
1.
(1) Automatic Dosing System
2
2.
(1) 6 W transformer
3
3.
(1) Discharge tubing (6')
4
4.
(1) Output Hose Holder
5
5.
(1) Water Treatment
6
6.
(1) Mounting Plate
Safety Information
WARNING: Risk of electric shock – This
Product has not been approved for use
in swimming pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only.
PLEASE NOTE: Aquascape Automatic
Dosing System water treatments have been
specifically formulated to work with the
Aquascape Automatic Dosing System.
Using water treatments not designed for use
with the system may permanently damage the
unit and void the warranty.
WARNING:
This product is weatherproof, but is not
designed to be submersed in the water or operated
at ambient temperatures below 40°F/4°C.
www.aquascapeinc.com |
☎
Contents
3
5
CAN 1-866-766-3426 |
☎
1
- Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use when protected
from direct sunlight snow and rain. If possible locate the outlet
or filter so that the power cord will reach the outlet without an
extension cord.
- Inspect cord for damage before using.
If an extension cord is required be sure it is rated for outdoor
use.
- Any wiring of this product should be performed by a qualified
electrician to ensure code compliance and user safety.
- To reduce risk of electrical shock, all wiring and junction
connections should be made per local codes. Requirements
may vary depending on usage and location.
- The power cable should be protected at all times to avoid
punctures, cuts, bruises and abrasions.
- Never handle power cords with wet hands.
- Unplug filter at receptacle outlet when not in use.
- Do not remove cord and strain relief. Do not connect conduit to
product.
- Do not use power cable to lift the Automatic Dosing System.
US 1-866-877-6637
6
2
4
3