Diamond HE706/P Instrukcja instalacji, użytkowania i konserwacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji, użytkowania i konserwacji dla Zamrażarka Diamond HE706/P. Diamond HE706/P 9 stron.

INSTALLATION

The cabinet must not be tilted. If necessary, some models may be tilted

to the side indicated on the packaging. If not, it cannot be tilted. You

must wait for at least 2 minutes from standing the cabinet up before

starting it up.

Remove the packaging except the support pallet. A forklift truck or pallet

truck can be used to move it to its installation site, lifting the

refrigerated cabinet making sure that it is not unbalanced.

The cabinet must not be dragged over the floor.

The area where the cabinet is positioned must be clear and clean,

preventing the refrigerator equipment's fan from absorbing materials

that are subsequently then deposited on the condenser's ribbing,

reducing system efficiency.

Remove the pallet, taking care not to knock the unit. The cabinet can

now be levelled, screwing in or unscrewing the legs. When it is levelled,

the protection film can be removed from the stainless steel using a blunt

object, and not a cutter as it could scratch the steel.

There must be a gap of 50 mm at the back and 30 mm at the sides of the cabinet when it has been

permanently installed.

A: LEG BODY

B SCREW

Turn clockwise to lower the unit

Turn anticlockwise to raise the unit