Panasonic WV-NF284 - i-Pro Network Camera Instrukcja instalacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-NF284 - i-Pro Network Camera. Panasonic WV-NF284 - i-Pro Network Camera 36 stron. Ip video cameras
Również dla Panasonic WV-NF284 - i-Pro Network Camera: Specyfikacje (2 strony), Broszura (2 strony), Odniesienie (2 strony), Odniesienie (2 strony), Tabela porównawcza (6 strony), Specyfikacje (2 strony), Specyfikacje (2 strony), Uwaga dotycząca integracji (8 strony)

Drukuj stronę
Panasonic WV-NF284 - i-Pro Network Camera Instrukcja instalacji

Troubleshooting

Before asking for repairs, check the symptoms on the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution
or if the problem is not described below.
Symptom
The power cannot be
turned on.
Cause/solution
When using AC/DC power supply
• Is AC 24 V or DC 12 V power supply
connected to the power cord termi-
nal?
→ Confirm the cable is firmly con-
nected.
When using a PoE device for power
supply
• Are the PoE device and the network
connector on the mounting side of
the camera connected using a LAN
cable (4-pair)?
→ Confirm the cable is firmly con-
nected.
• Depending on the PoE device, the
power supply will stop when the
demanded power exceeds its total
power limit for all PoE ports.
→ Refer to the operating instruc-
tions of the PoE device in use.
Page
21 - 22
31