Panasonic WV-SP105 Instrukcja instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SP105. Panasonic WV-SP105 36 stron. Ip video cameras
Również dla Panasonic WV-SP105: Specyfikacje (2 strony), Specyfikacje (2 strony), Arkusz danych (2 strony), Tabela porównawcza (6 strony), Uwaga dotycząca integracji (8 strony)

Camera mounting

The camera will be mounted on the camera mount bracket (locally procured). After the angular field

of view is determined, the safety wire will be secured.

Important:

• The installation area shall be strong enough to hold the camera and camera mount bracket

(locally procured).

• The camera mount bracket (locally procured) shall be mounted on the foundation part of the

construction or a part with adequate strength.

• To prevent the mounting strength from becoming lower, do not use wooden screws to secure

the camera mount bracket (locally procured).

• The camera cannot be mounted on a camera housing or a pan/tilt head.

Secure the camera mount bracket (locally procured) to an installation position, and mount the

camera on the camera mount bracket. Prepare mounting screws according to the material of

the area where the camera mount bracket (locally procured) is to be installed. The installation

method may be different depending on the material of the area where the bracket is to be

installed.

When installing on steel:

When installing on concrete: Fix with anchor bolts (M6 or M8)

The dimensions and conditions required for the screw of camera mount bracket is described as fol-

lows:

1/4-20UNC

If the screw of camera mount bracket is too long, adjust the screw length using a spacer so as to

meet the dimensions and conditions described in the illustration.

Important:

• When the camera mount bracket (locally pro-

cured) is mounted on a wall, be sure to

observe the mounting height described on

the illustration.

Fix with bolts and nuts (M6 or M8).

290 cm {9.51'}

or more

Floor