Panasonic WV-SW316 Instrukcja instalacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SW316. Panasonic WV-SW316 50 stron. Ip video cameras
Również dla Panasonic WV-SW316: Specyfikacja (2 strony), Uwaga dotycząca integracji (8 strony)
Drukuj stronę
Installations / Connections
Secure the camera to the camera mount bracket
The tilt angle is locked downward at shipment.
z
Loosen the tilting lock screw approx. 1 rotation and adjust the tilt angle of the camera to the
horizontal position.
x
Tighten the tilting lock screw again after tilt angle adjustment.
Note:
• Use a hexagonal wrench with width across flats of 4 mm (locally procured) to loosen or tighten
the tilting lock screw.
Camera main body
Approx. 90°
c
Pass each cable and the safety wire through the camera mount bracket, and secure the cam-
era to the camera mount bracket with the camera fixing screws x3 (accessory).
Pass the network cable first through the camera mount bracket before passing through the
other cables.
IMPORTANT:
• E nsure that the camera fixing screws (accessory) are firmly secured.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Camera main body
Camera fixing screw x3 (M4 x 8)
(accessories)
(This illustration represents WV-SW316.)
20
Tilting lock screw
Safety wire
Horizontal
(This illustration represents WV-SW316.)
Mounting boss for safety wire
Network cable
Camera mount bracket
Video output cable
Cable clamp
Drain slit
Camera mount bracket