Panasonic WV-SW395 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SW395. Panasonic WV-SW395 40 stron. Ip video cameras
Również dla Panasonic WV-SW395: Specyfikacje (2 strony), Broszura (2 strony), Tabela porównawcza (6 strony), Instrukcja instalacji (40 strony), Instrukcja instalacji (40 strony), Uwaga dotycząca integracji (8 strony)
Drukuj stronę
What to do if "WARMING UP-PLEASE WAIT"
appears on the display.
This message indicates that the temperature inside the
camera has become extremely low.
In such a case, wait until the heater unit of the camera
raises the internal temperature (for around 2 hours or more
in low temperatures below –10 ºC {14 ºF}), and turn on
the power again.
About SDHC/SD memory card
• Before removing the SDHC/SD memory card from the
camera, it is necessary to select "Not use" for "SD
memory card" first. The recorded data may be cor-
rupted if the SDHC/SD memory card is removed
when "Use" is selected for "SD memory card". Refer
to page 16 for descriptions of how to insert/remove
an SDHC/SD memory card.
• When using an unformatted SDHC/SD memory card,
format it using this product. Recorded data on the
SDHC/SD memory card will be deleted when format-
ted. If an unformatted SDHC/SD memory card or an
SDHC/SD memory card formatted with other devices
is used, this product may not work properly or perfor-
mance deterioration may be caused. Refer to the
Operating Instructions (included in the CD-ROM) for
how to format a SDHC/SD memory card.
• When some SDHC/SD memory cards are used with
this product, the product may not work properly or
performance deterioration may be caused. Use the
SDHC/SD memory cards recommended in page 38.
Code label
The code labels (accessory) are required at inquiry for trou-
ble. Use caution not to lose these labels. It is recom-
mended to paste one of the labels onto the CD-ROM case.
About the MOS image sensor
• When continuously shooting a bright light source such
as a spotlight, the color filter of the MOS image sen-
sor may have deteriorated and it may cause discolor-
ation. Even when changing the fixed shooting direc-
tion after continuously shooting a spotlight for a cer-
tain period, the discoloration may remain.
• When shooting fast-moving subjects or performing
panning/tilting operations, objects crossing the shoot-
ing area may look to be bending askew.
MPEG-4 Visual Patent Portfolio License
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial
use of a consumer for (i) encoding video in compliance
with the MPEG-4 Visual Standard ("MPEG-4 Video") and/
or (ii) decoding MPEG-4 Video that was encoded by a
consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider
licensed by MPEG LA to provide MPEG-4 Video. No
license is granted or shall be implied for any other use.
Additional information including that relating to
promotional, internal and commercial uses and licensing
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD ("AVC
VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
About the self-diagnosis function
When this product malfunctions due to exogenous noise,
etc. for 30 seconds or more, the product will automatically
reset and will return to normal state. When the product is
reset, initialization will be carried out as when the power of
the product is turned on. When the product repeatedly
resets, exogenous noise level around the product may be
high and that may cause malfunction. Contact your dealer
for instructions.
About the dehumidifying device
This product has dehumidifying device to keep the inside
at low moisture level, preventing condensation and quickly
dissipating dew if produced.
Dew may be produced depending on the conditions of
temperature, humidity, winds, and rain, and it may take
time to dehumidify.
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for a long
period of time, the grease coating inside these parts may
become sticky. That may obstruct the parts from moving.
To prevent this, move the lens or pan/tilt head periodically.
Or perform position refresh periodically in the manner
described in "Position refresh".
Position refresh
During the use for a long period of time, the preset posi-
tions may become inaccurate. When "Position refresh" is
set for the created schedule, the camera position will be
corrected periodically.
Refer to the Operating Instructions (included in the CD-ROM)
for how to perform the settings.
11