Panasonic WV-SW395 Instrukcja instalacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SW395. Panasonic WV-SW395 40 stron. Ip video cameras
Również dla Panasonic WV-SW395: Specyfikacje (2 strony), Broszura (2 strony), Tabela porównawcza (6 strony), Instrukcja instalacji (40 strony), Instrukcja instalacji (40 strony), Uwaga dotycząca integracji (8 strony)

If the installation screen of the viewer software "Network Camera View 4S" is displayed, follow the instructions of the

wizard to start the installation. (The viewer software is installed from the camera.)

• The "Live" page will be displayed.

• If you cannot install the viewer software "Network Camera View 4S" or if images are not displayed, click the [Install]

button next to [Viewer Software] on the launcher window to install the software.

• Perform the [Time & date] settings in the "Setup" - "Basic" page before using the camera.

Note:

• When no image is displayed on the "Live" page, refer to the Troubleshooting in the Operating Instructions on the pro-

vided CD-ROM.

• It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function. Refer to

the Operating instructions on the provided CD-ROM for how to configure the HTTPS settings.

• Click the [Setup] button on the "Live" page, the user authentication window will be displayed. Enter the default user

name and password as follows, and log in.

User name: admin

Password: 12345

• When changing settings related to the network settings, such as connection mode, IP address, and subnet mask,

click the [Network Settings] button in [Panasonic IP Setting] screen as shown in step c, then change each setting.

• Due to security enhancements in "IP Setting Software", "Network settings" of the camera to be configured cannot be

changed when around 20 minutes have passed after turning on the power of the camera. (When the effective period is

set to "20 min" in the "Easy IP Setup accommodate period".)

However, settings can be changed after 20 minutes for cameras in the initial set mode.

• "Network Camera Recorder with Viewer Software Lite" which supports live monitoring and recording images from mul-

tiple cameras is available. For further information, refer to our website

(http://security.panasonic.com/pss/security/support/info.html).