Panasonic = Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Panasonic =. Panasonic = 36 stron. Color television
Również dla Panasonic =: Instrukcja obsługi (29 strony), Instrukcja konfiguracji (5 strony)

Drukuj stronę

TVNideo Button -

Press the TVNIDEO button

to select desired input.

Multi Button

The MULTI button can be programmed to operate up

to 6 Remote function buttons at the same time.

For Example: TV

Power/On,

VCR Power/On

(selected

brands) can be operated at the same

time with

one press

the

MULTI

button.

Procedure

First program the Remote for the selected VCR

Infra-red access

code.

Confirm that the Remote

Control is compatible

with

the equipment.

2. Face the Remote Control transmitter away from all

equipment remote sensors.

Press the Remote TV POWER button and the

MULTI

button

simultaneously.

(All

commands are

erased.)

VIDEO 2

VIDEO 1

CH 02

Signal connected to:

REAR VIDEO

/AUDIO

INPUT

JACKS

REAR VIDEO

/AUDIO

INPUT 1 JACKS

TV or CABLE

----<~

R-Tune (Rapid Tune) Button -

Press the

R-TUNE (RAPID TUNE) button to instantly switch

between the last two channels selected (without any On

Screen display being activated).

Recall Button -

Press the RECALL button to

review:

• Audio Mode status

• CH number or Video Input selected

• Sleep Timer status

• Clock time

• Channel Caption (Station Identifier)

NOTE:

You can also program the MULTI button to perform

most individual Remote Control button functions.

Buttons which continuously perform a function as

long as pressed (Volume Up/Down, Channel

Up/Down, etc.) cannot be programmed. Only those

buttons which perform a function when initially

pressed (Power

On/Off,

Mute, Direct Channel

Entry,

etc.) can be programmed.

To delete entered functions - Press the Remote

TV POWER and MULTI buttons simultaneously.

Now you can enter from one to six different Remote

functions.

(TV)

P~R

PRESS SIMULTANEOUSLY

(TV)

P~R

PRESS SIMULTANEOUSLY

Press a maximum of 6 Function buttons on the

Remote.

Each button you press is equal to one function. If six

remote button functions are

entered,

all will register

in the MULTI button memory in the sequence

entered. When less than

six

remote button

functions

are

entered,

press the MULTI button to end the

program mode.

(Waiting

more than 30 seconds

without

pressing

another button will also end the

program mode.)

The following is an example of Remote functions

that can be programmed into the MULTI button.

TV Power -

For turning

TV ON and OFF.

VCR Power - For

turning

VCR ON and OFF

(selected brands

after

programming it's Infra-red

access

code,

necessary).

Both can be turned ON

OFF with one press of the

MULTI button.

(TV)

VCR

J"-

~R_

1:00

rVIDE01'

CH03

XYYZ

STEREO

SAP

MONO

CHANNEL TUNED

IMMEDIATELY BEFORE

R-TUNE

Press Button

Press Button Again

•

~ r~

... _

. . ,,'\. _

RECALL

CHANNEL NOW

BEING VIEWED

-9-