Panasonic CT-27D11C Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Panasonic CT-27D11C. Panasonic CT-27D11C 50 stron. 36" diagonal stereo monitor-receiver
Również dla Panasonic CT-27D11C: Instrukcja obsługi (50 strony)
Drukuj stronęI
NSTALLATION
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
r
r
r
AC Power Supply Cord
CAUTION:
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT.
OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:
Antenna Connections
r
r
6
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors, that match your component connectors.
Avoid long cables to minimize interference.
TO PREVENT ELECTRIC SHOCK MATCH WIDE
DO NOT USE A PLUG WITH A RECEPTACLE OR
A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended.
Antenna Mode must be set to TV.
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the
Setup Menu.
Polarized plug
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna