Panasonic CT-27D32 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Panasonic CT-27D32. Panasonic CT-27D32 40 stron.

Drukuj stronę

REMOTE CONTROL OPERATION

Programming

The Remote

The Universal

Remote

Control can be programmed

to operate

many manufacturers'

components,

using the component

function

buttons for VCR,

DVD,

CABLE

or DBS.

Follow the procedures

for programming

your Remote

Control with or

without a code for the component.

Default

Modes

For Remote

Control

e L$.

,l'_'

Y=4'd4"

R'_ R

I ml'_l

(4"(Imlg

"IV (Panasonic Only)

Panasonic "IV Codes

VCR

VCR (Preset)

Panasonic VCR Codes

DBS

DBS (Preset)

Panasonic DBS Codes

CABLE

CABLE (Preset)

Panasonic DBS Codes

DVD

DVD, CD (Preset)

Panasonic DVD Codes

Determine the manufacturer

of the component and look in the table for the code.

Programming

With a Code

Procedure

Confirm that the external component is plugged in and operating.

Turn the component off.

ACTION

Press

and (_

together, for at least 5 seconds.

Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

Enter the 3-digit component code usingthe Remote Control numeric keypad (0 ~ 9 buttons),

Press the Remote Control e

to test the component. If the procedure was successful, the component will turn

OR.

Helpful Hints: Unsuccessful

Code

If the component does not operate with the Remote Control, repeat

the procedure

using another

code. (Some

brands

have multiple]

codes).

If an incorrect code is entered, or if the procedure takes longer than

30 seconds, the programming will fa .

Programming

Without

A Code

This procedure

searches

all codes

and is called the "sequence

method."

Confirm that the external component

is plugged in and on.

Turn the component off.

ACTION

Press

and _

together, for at least 5 seconds.

Press appropriate component button on the Remote Control.

Press VOL_" to move forward to the next code. Press _

VOL to move backward.

Press the Remote Control _

to test the component. If the procedure was successful, the component will turn on.

Note:

Repeat the above steps until the component

code is found. It may take many attempts before the correct code

is found.

ACTION

After the code is found, press

to store the code.