Diamond Audio Technology D5 5.1 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz samochodowy Diamond Audio Technology D5 5.1. Diamond Audio Technology D5 5.1 17 stron. Professional reference series amplifier
Drukuj stronęFEATURES
Technical
• Fully Regulated Power Supply
• Up To 5V RMS Input Signal Voltage Capability
• High pass x-over 12 dB/oct. fixed at 80 Hz (front, rear, and center only)
• Low pass x-over 12 dB/oct. 60 Hz-250 Hz (sub channels only)
• Sub-sonic filter 12 dB/oct. 17 Hz-80 Hz (sub channels only)
• Independant Gain for Each Set of Channels, Including Center
• Gain Bypass (sub channels only)
• 2 oz. Copper Circuit Board
• Massive Proprietary Heatsink
• Individual Channel Protection Circuitry
Convenience/Appearance
• Fully Variable Electronic Crossovers
• Nickel Plated Solid Brass, Circuit Board Mounted, 4 Gauge Direct
Power/Ground Connector Blocks
• Nickel Plated Solid Brass, Circuit Board Mounted, 10 Gauge Direct or
Banana Plug Direct Speaker Connectors
• Billet Aluminum End Plates
• Fully Adjustable Mounting Feet
SPECIFICATIONS
Frequency Response:
Signal-to-Noise Ratio:
THD Front, Rear, and Center:
THD Sub Channels:
Channel Separation:
Input Sensitivity:
Input Impedance:
Power Supply Operating Range:
1 Diamond Audio Technology
10 – 50,000 Hz
100dB
0.03%
0.05%
80dB (min.)
.2 to 5V RMS
>20k Ohms
11 to 14.5V DC