Diamond Audio Technology CM351m Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki samochodowe Diamond Audio Technology CM351m. Diamond Audio Technology CM351m 10 stron. Cm3 series convertible speaker systems
Drukuj stronęBridge Mounting
1. Remove grill from mid bass speak-
er.
2. Align bridge over mid bass cone
so that the narrow end of the
bridge makes connection with the
points over the terminal side of
the mid bass speaker.
3. Mount bridge to the mid bass
frame using the provided counter-
sink bridge mounting screws. (do
not over tighten)
4. Replacing the grill is optional.
Mid Bass Speaker Mounting
1. Remove grill from mid bass if not already done.
2. Attach provided mid bass speaker gasket to the rear mounting surface
of the frame to ensure proper seal.
3. Mount in desired location using the provided mounting screws. Be cer-
tain to mount the speaker on a flat surface to avoid twisting the frame.
4. Some locations will require pre-drilled mounting holes and screw holes.
Use the provided mounting screw clips in these cases.
5. Follow the wiring instructions detailed later in this manual to finish
installation. (some wiring may need to be done before permanately
mounting the speaker)
6. Replacing the grill is optional.