Aquasub engineering ADP 03SF Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Aquasub engineering ADP 03SF. Aquasub engineering ADP 03SF 15 stron. Submersible dewatering pump. texmo adp series
Drukuj stronęINSTALLATION PRECAUTIONS
PRODUCT INSPECTION
Inspect the purchased pump for damage or leakage during
transportation. And make sure all bolts and nuts are tightened properly.
If you find damage or discrepancy in the product, contact the dealer
where the pump was purchased or the "AQUASUB ENGINEERING's"
sales office in your area.
TYPICAL INSTALLATION
A typical installation diagram is shown below. Please follow the given
installation precautions before and during installation.
Single phase models
For three phase models it is recommended to use a control panel with
single phase prevention, overload relay and control for float switch
operation.
From control panel
(For three phase)
Chain or Rope
Discharge pipe
Cable
Pump
With pump
(For single phase)
Minimum water lavel
Sludge
( Place the pump above sludge)
Three phase models