Aquatec SWP 6000 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Aquatec SWP 6000. Aquatec SWP 6000 12 stron. Swp series solar electric submersible pump d.c. powered

Drukuj stronę

Fault

Pump operates but there

is no flow or reduced flow

Pump will not operate

AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15

Troubleshooting Guide

Possible Cause

1)Low voltage

2)Water supply out

3) Clogged filter screen

4) Fluid path in plumbing is

restricted or damaged/leaking

5) Pump is worn

1) Faulty power supply

2) Wire connection fault

How to Correct

1)Check power supply for proper

voltage

2) Ensure pump is installed below the

water level (maximum submergence 25

ft / 7.6 meters)

3)Clean debris from pump suction

screen

4) Check for pinched hose or clogged

tubing. Check for tubing/clamp leaks or

tears

5) Inspect components

1) Ensure adequate power supply

2) Inspect wire connections and fuses

PAGE 11 OF 12