HP 10500 series Arkusz danych - Strona 5

Przeglądaj online lub pobierz pdf Arkusz danych dla Przełącznik HP 10500 series. HP 10500 series 20 stron. Type d w/comware v7 os mpu (jh198a). product end-of-life disassembly
Również dla HP 10500 series: Specyfikacje (42 strony), Arkusz danych (8 strony), Specyfikacje (20 strony), Instrukcje demontażu (3 strony)

HP 10500 series Arkusz danych
Data sheet | HP 10500 Switch Series
Virtual private network (VPN)
• IPSec
Provides secure tunneling over an untrusted network, such as the Internet or a wireless
network; and offers data confidentiality, authenticity, and integrity between two network
endpoints
• Generic routing encapsulation (GRE)
Transports L2 connectivity over an L3 path in a secured way; and enables the segregation of
traffic from site to site
• Manual or automatic Internet key exchange (IKE)
Enables the manual or automatic key exchange required for the algorithms used in encryption
or authentication; auto-IKE allows automated management of the public key exchange,
helping ensure the highest levels of encryption
Management
• Management interface control
Enables or disables each of these interfaces, depending on security preferences: console port,
telnet port, or reset button
• Industry-standard CLI with a hierarchical structure
Reduces training time and expenses; and increases productivity in multivendor installations
• Management security
Restricts access to critical configuration commands; offers multiple privilege levels with
password protection; uses ACLs to provide telnet and SNMP access; and allows logging of all
access with local and remote syslog capabilities
• SNMPv1, v2, and v3
Provide complete support of the SNMP and industry-standard management information base
(MIB) as well as private extensions; SNMPv3 supports increased security using encryption
• sFlow (RFC 3176)
Provides scalable ASIC-based wire-speed network monitoring and accounting with no impact
on network performance; this allows network operators to gather a variety of sophisticated
network statistics and information for capacity planning and real-time network monitoring
purposes
• Remote monitoring (RMON)
Uses standard SNMP to monitor essential network functions; and supports events, alarms,
history, and statistics groups as well as a private alarm extension group
• FTP, trivial FTP (TFTP), and secure FTP (SFTP) support
Offers different mechanisms for configuration updates; the FTP allows bidirectional transfers
over a TCP/IP network; the TFTP is a simpler method that uses the UDP; and the SFTP runs
over an secure shell (SSH) tunnel to provide additional security
• Debug and sampler utility
Supports ping and trace-route for both IPv4 and IPv6
• Network time protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; and keeps timekeeping
consistent among all clock-dependent devices within the network, so that the devices can
provide diverse applications, based on the consistent time
• Network quality analyzer
Analyzes network performance and service quality by sending test packets; provides network
performance and service quality parameters such as jitter, TCP, or FTP connection delays
and file transfer rates; and allows a network manager to determine the overall network
performance as well as diagnose and locate network congestion points or failures
5