HP 10500 series Specyfikacje - Strona 7

Przeglądaj online lub pobierz pdf Specyfikacje dla Przełącznik HP 10500 series. HP 10500 series 20 stron. Type d w/comware v7 os mpu (jh198a). product end-of-life disassembly
Również dla HP 10500 series: Specyfikacje (42 strony), Arkusz danych (8 strony), Arkusz danych (20 strony), Instrukcje demontażu (3 strony)

Drukuj stronę

Data sheet | HP 10500 Switch Series

• Static IPv6 routing

Provides simple manually configured IPv6 routing

• Dual IP stack

Maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network

to an IPv6-only network design

• Routing Information Protocol next generation (RIPng)

Extends RIPv2 to support IPv6 addressing

• OSPFv3

Provides OSPF support for IPv6

• IS-IS for IPv6

Extends IS-IS to support IPv6 addressing

• BGP+

Extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing

• Multiprotocol Label Switching (MPLS)

Uses BGP to advertise routes across Label Switched Paths (LSPs), but uses simple labels to

forward packets from any Layer 2 or Layer 3 protocol, which reduces complexity and increases

performance; supports graceful restart for reduced failure impact; supports LSP tunneling

and multilevel stacks

• Multiprotocol Label Switching (MPLS) Layer 3 VPN

Allows Layer 3 VPNs across a provider network; uses MP-BGP to establish private routes

for increased security; supports RFC 2547bis multiple autonomous system VPNs for added

flexibility

• Multiprotocol Label Switching (MPLS) Layer 2 VPN

Establishes simple Layer 2 point-to-point VPNs across a provider network using only MPLS

Label Distribution Protocol (LDP); requires no routing and, therefore, decreases complexity,

increases performance, and allows VPNs of non-routable protocols; uses no routing

information for increased security; supports Circuit Cross Connect (CCC), Static Virtual Circuits

(SVCs), Martini draft, and Kompella-draft technologies

• Virtual Private LAN Service (VPLS)

Establishes point-to-multipoint Layer 2 VPNs across a provider network

• Super VLAN

Saves IP address space using the RFC 3069 standard (also called VLAN Aggregation)

• Equal-Cost Multipath (ECMP)

Enables multiple equal-cost links in a routing environment to increase link redundancy and

scale bandwidth

• IPv6 tunneling

Provides an important element for the transition from IPv4 to IPv6; allows IPv6 packets to

traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet;

supports manually configured 6-to-4 intra-site-automatic-tunnel-addressing-protocol

(ISATAP) tunnels, and IPv6 VPN provider-edge router tunnel

Security

• Access control list (ACL)

Supports powerful ACLs for both IPv4 and IPv6; ACLs are used for filtering traffic to prevent

unauthorized users from accessing the network, or for controlling network traffic to save

resources; rules can either deny or permit traffic to be forwarded; rules can be based on a

Layer 2 header or a Layer 3 protocol header; rules can be set to operate on specific dates

or times