HP 2920 Series Podręcznik szybkiej konfiguracji

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Przełącznik HP 2920 Series. HP 2920 Series 4 stron.

HP 2920-24G, 2920-48G, 2920-24G PoE+, and 2920-48G PoE+ Switches

Quick Setup Guide

For more detailed instructions and information to set up your switch, view or download the Installation and Getting Started

Guide for your switch at www.hp.com/networking/support.

Unpack and check included parts.

Prepare for installation. To avoid personal injury or product damage, review the "Safety Precautions" on

page 4.

Power on the switch and verify that Self-Test completes normally. The switch does not contain a power switch. It

is powered on by connecting power through the AC power cord. After verification, unplug the switch.

(Optional) Install Modules. On the back of the switch are slots for 10 Gbps network connectivity and for high-speed

stacking. See the switch Installation and Getting Started Guide for more information on the use of these modules and

supported stacking topologies.

HP 2920 10GbE Module

Documentation kit

■

Switch

■

Console port serial cable (DB-9 to RJ-45)

■

Accessory kit (installation hardware)

■

AC power cord

■

After Self-Test:

Power LED = On

Fault LED = Off

Test LED = Off

HP 2920 Stacking Module