HP 316095-B21 - StorageWorks Edge Switch 2/24 Aktualizacja instrukcji - Strona 7

Przeglądaj online lub pobierz pdf Aktualizacja instrukcji dla Przełącznik HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 9 stron. Edge switch release notes
Również dla HP 316095-B21 - StorageWorks Edge Switch 2/24: Podręcznik (41 strony), Podręcznik (40 strony), Uwaga dotycząca wydania (32 strony), Uwaga dotycząca wydania (27 strony), Podręcznik (26 strony), Uwaga dotycząca wydania (27 strony), Uwaga dotycząca wydania (25 strony), Instrukcja instalacji (24 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (22 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (19 strony), Uwaga dotycząca wydania (19 strony), Uwaga dotycząca wydania (18 strony), Instrukcja obsługi (17 strony), Uwaga dotycząca wydania (17 strony), Instrukcje aktualizacji (16 strony), Instrukcja obsługi (16 strony), Instrukcja instalacji (16 strony), Uwaga dotycząca wydania (16 strony), Uwaga dotycząca wydania (17 strony), Uwaga dotycząca wydania (17 strony), Uwaga dotycząca wydania (11 strony)

ISS Technology Update

of the existing 3-Gb/s SAS interface. Therefore, for directly attached storage configurations, there is currently no performance

benefit to using 6-Gb/s SAS drives attached to 6-Gb/s-capable disk controllers.

Interoperability of 6 Gb/s drives with 3 Gb/s drives

Six-Gb/s SAS drives are completely interoperable with 3-Gb/s drives. With the SAS interface standard, each drive is

connected to the array controller using a separate point-to-point link, allowing the controller to communicate with each drive

independently and at its own link speed. As a result, 6-Gb/s drives do not incur any performance penalty when mixed with

3-Gb/s drives on a 6-Gb/s capable array controller. Six-Gb/s drives can be attached to 3-Gb/s controllers, but they will

operate using the 3-Gb/s SAS channel.

6 Gb/s SAS drives and Modular Storage Arrays

Six-Gb/s SAS drives will provide definite performance benefits when used with next-generation HP Modular Storage Arrays

(MSAs). MSAs provide external storage that is attached to the server's storage controller using a SAS wide port consisting of

four SAS interface channels. MSAs then use SAS Expanders to support large numbers of drives across this connection. When

the disk I/O for these drives is aggregated across the four SAS channels, the channel bandwidth becomes an important

consideration. With 3-Gb/s drives and SAS channels, the four channel SAS port will typically become saturated when the MSA

is configured with eight to twelve drives. The next generation of MSAs, using 6 Gb/s drives and SAS channels, will be able to

support up to twice this number of drives before the SAS wide port bandwidth becomes saturated.

6 Gb/s HP Smart Array controllers

Introducing HP Smart Array controllers with 6-Gb/s SAS channels in the HP ProLiant G6 servers prepares the way for the next

several generations of SAS drives. Maximum disk I/O has been increasing 30 to 40% with each disk drive generation and will

soon outstrip the capabilities of the 3-Gb/s SAS channel. Disk controllers capable of supporting 6-Gb/s operation will be better

able to support the increased throughput of these drives when they are introduced.

Additional resources

For additional information on the topics discussed in this article, see these resources:

Resource

HP StorageWorks Modular Smart

Arrays

HP ProLiant Smart Array RAID

controllers

URL

http://h18006.www1.hp.com/storage/disk_storage/msa_diskarrays/

index.html

http://h18004.www1.hp.com/products/servers/proliantstorage/array

controllers/index.html

Volume 8, Number 5