HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Podręcznik administracyjny - Strona 24

Przeglądaj online lub pobierz pdf Podręcznik administracyjny dla Przełącznik HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 40 stron. Storageworks modular smart array controller, cache, and battery replacement instructions
Również dla HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter: Podręcznik referencyjny (48 strony), Uwaga dotycząca wydania (13 strony), Skrócona instrukcja obsługi (8 strony), Uwaga dotycząca wydania (8 strony), Uwaga dotycząca wydania (8 strony), Skrócona instrukcja obsługi (7 strony), Uwaga dotycząca wydania (5 strony), Instrukcje dotyczące wymiany (4 strony)

Installation procedures

The following procedures describe how to install the Hardware Providers on a Windows 2003 server.

If you have not already conﬁgured the server and the array as instructed in "Chapter 2 Conﬁguration,"

do so now before you install the HP Provider software. The HP Provider will not work if the array and

server have not been correctly conﬁgured before you install the Provider.

You will perform the following tasks on the Windows server during installation:

•

Remove the previous version of the Provider, if necessary.

•

Run the Provider installation executable: setup.exe.

•

Follow the InstallShield Wizard instructions to install the software.

•

Install Microsoft QFEs (quick ﬁxes), if any. See the Provider READMEﬁle for details.

•

Verify installation using Windows Disk Management and the DISKRAID List Provider command.

Follow these steps to install the HP VDS Hardware Provider on a Windows 2003 server. To stop

installation at any point during this procedure, click Cancel:

Insert the Provider installation CD and double click the Provider executable:

setup.exe

The Preparing to Install window appears, followed by the install Welcome screen.

Installation