AQUATECH Elite Sport Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer AQUATECH Elite Sport. AQUATECH Elite Sport 6 stron. Housing

IMPORTANT

INFORMATION

LENS PORT SEAL

Remember to tighten your ports

very tight with both hands to ensure

a good seal on the front O-ring

between your Lens Port and Sport

Housing.

WATER TESTING

Water testing is a very important

process before entering the water in

all types of conditions. Once you have

followed "SECURING THE HOUSING"

instructions we recommend that you

perform a water test yourself without

the camera and lens inside.

1. Fill up a bathtub, use a swimming

pool or hop in the ocean to test. The

choice is yours just as long as you have

a body of water where you can fully

submerge your equipment.

2. Hold your equipment under the

water for 5-10 seconds while also

pressing all the buttons. Then hold

the Sport Housing above your head

at a tilted angle so that if there is

any water inside it will gather at the

bottom right back corner.

3. Repeat process for 20 seconds then

30 seconds.