HP ProCurve 1600M Przeczytaj mnie najpierw

Przeglądaj online lub pobierz pdf Przeczytaj mnie najpierw dla Przełącznik HP ProCurve 1600M. HP ProCurve 1600M 8 stron. Redundant power supply
Również dla HP ProCurve 1600M: Arkusz specyfikacji (12 strony), Podręcznik recenzenta (27 strony), Podręcznik uzupełniający (2 strony), Podręcznik uzupełniający (2 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (36 strony), Instrukcja instalacji (28 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (4 strony), Podręcznik użytkownika (8 strony), Suplement do podręcznika (28 strony), Przeczytaj mnie najpierw (16 strony), Instalacja i demontaż (2 strony), Instrukcja instalacji (12 strony), Podręcznik planowania i wdrażania (40 strony), Instrukcje demontażu produktu po zakończeniu eksploatacji (2 strony), Instrukcja instalacji (46 strony), Podręcznik diagnostyki (2 strony), Instrukcje demontażu (2 strony)

Drukuj stronę
HP ProCurve 1600M Przeczytaj mnie najpierw

Read Me First

for the HP ProCurve Routing Switches 9304M, 9308M, and 6308M-SX
and the HP ProCurve Switch 6208M-SX
Contents:
Software Updates Are Free!
New Software Release 05.2.14
Module Installation
Getting Started
Your Free Ticket to Proactive Networking
Accessory Parts List
Operating Notes, Troubleshooting, and Errata
Software Updates Are Free!
Help Us Help You...Register Now To Keep Up-To-Date on the Latest Software!
Hewlett-Packard provides free software updates for all managed HP ProCurve networking products. To access
the software updates, to to the HP ProCurve website at
Software Updates.
Register for Automatic Notification of Updates. From the Free Software Updates page you can also
register yourself to automatically receive email notice of new updates for your managed HP ProCurve
networking products. Just follow the instructions on that page for how to receive the update notices.
To determine whether you have the latest software, compare the software version that is available on the website with the
version that is currently installed in your switch or routing switch. To load a new software image, see chapter 4, "Updating
Software Images and Configuration Files", in the manual you received with the switch or routing switch.
Note that current product documentation, plus any supplements describing how to use any recently released software
updates are also available on the above website (click on
New Software Release 05.2.14 (or Later) Is Now Available with the Following
New Features
• Support for Redundant Management Modules
– Increased Default Maximum Number of IP Routes
– Larger Default Maximum Number of BGP4 Neighbor Prefixes
• Single-Instance Spanning Tree
show tech
• Enhanced
command
For more information, refer to the documentation shipped with the switch or routing switch, or to Release Notes for
Version 05.2.14 of the HP ProCurve Routing Switches 9304M, 9308M, and 6308M-SX, and the HP ProCurve Switch
6208M-SX Operating System. This booklet is available on HP's ProCurve website at http://www.hp.com/go/procurve
(click on Technical Support, then Manual).
Covering Software Release 05.2.14 (or Later)
Technical Support , then Manual ).
•
Faster BGP4 route update convergence time
• SNMP and Syslog Message Enhancements
• More Layer 2, Layer 3, and System Level Enhancements
• Software Fixes
Warning: Do not use the handles on the power supply
units to lift or carry the routing switch.
http://www.hp.com/go/procurve , then click on Free