Front panel
3
2
1
Hard drive bays
3
Diskette drive bay
5
Internal health LED
7
NIC 1 link/activity LED
9
UID LED button
Back panel
13
1
2
3
12
11 10
1
Non-hot-plug PCI-X expansion
slot 3, 64 bit/100 MHz, bus B
3
Serial connector
5
Mouse connector
7
Keyboard connector
9
NIC 2 connector
11
Video connector
13
RJ-45 link LED
15
UID LED
4
1
2
USB port
4
DVD/CD-ROM drive
6
External health LED
8
NIC 2 link/activity LED
10
Power on/standby
button/system power LED
14
4
5
6
9
8
7
15
16
2
Smart Array 6402 128 MB
RAID controller
4
iLO connector
6
Power cord connector
8
NIC 1 connector
10
USB connectors
12
VHDCI SCSI connector (port 1)
14
RJ-45 activity LED
16
Power supply LEDs
Installing the server into the rack
CAUTION:
5
to populate the rack from the bottom to top.
6
7
1.
Install the server and cable management arm. See the
installation instructions that ship with the 2U Quick Deploy Rail
8
System. If you chose not to install the cable management arm,
9
install the power cord anchor to the server.
10
IMPORTANT:
components, ensure that there is enough slack in each of the cables
to prevent damage to the cables when the server is extended from
the rack. If using the power cord anchor, ensure that there is enough
slack in the power cord so that the redundant power supply can be
removed without disconnecting the power cord from the primary
power supply.
2.
Install the MSA cables, as shown, and any peripheral devices.
To MSA array
3.
Connect the power cord to the back of the server.
4.
Secure cables to the cable management arm, if installed.
WARNING!
the equipment, connect the VHDCI connector on the controller
module to the external connector of a sixth-generation Smart Array
Controller on the server.
Starting the DP Storage Server
10679B
6
To begin the first-time startup procedure:
•
Ensure that the server is safely installed in an adequate
environment.
•
Ensure that the power cables and peripheral devices are
plugged in, and that AC power is supplied to the server.
•
See the DP Storage Server startup chapter in the HP ProLiant
Data Protection Manager Server user guide.
Page 2
Always install the heaviest item first, and continue
When using cable management arm
To reduce the risk of electric shock or damage to
10680B
680
Drukuj stronę