HP StorageWorks 1500cs - Modular Smart Array Instrukcje dotyczące wymiany

Przeglądaj online lub pobierz pdf Instrukcje dotyczące wymiany dla Przełącznik HP StorageWorks 1500cs - Modular Smart Array. HP StorageWorks 1500cs - Modular Smart Array 5 stron. Storageworks modular smart array
Również dla HP StorageWorks 1500cs - Modular Smart Array: Podręcznik administracyjny (40 strony), Uwaga dotycząca wydania (13 strony), Skrócona instrukcja obsługi (7 strony), Uwaga dotycząca wydania (5 strony), Instrukcje dotyczące wymiany (4 strony), Instrukcje dotyczące wymiany (2 strony), Podręcznik (16 strony), Instalacja (4 strony)

Drukuj stronę
HP StorageWorks 1500cs - Modular Smart Array Instrukcje dotyczące wymiany
HP StorageWorks
1500/1510i Modular Smart
Array chassis replacement
instructions
© Copyright 2004–2006 Hewlett-Packard Development Company,
L.P.
Second edition (December 2006)
The information in this document is subject to change without
notice.
Printed in Singapore.
www.hp.com
364862-002
About this document
This document details procedures for replacing a failed MSA1500
or MSA1510i chassis. When replacing a chassis, components are
removed from the failed chassis and then installed in the replacement.
Components that are moved include the following:
•
Fibre Channel (or Ethernet) I/O modules
•
Fan modules
•
SCSI I/O modules
•
Power supply modules
•
Controllers
•
Blanks
NOTE:
The MSA1500 connects to the SAN with a Fibre Channel I/O
module and the MSA1510i connects to the network with a 2–Port
Ethernet I/O module. Illustrations in this document show the Fibre
Channel I/O module of an MSA1500. If you are replacing an
MSA1510i chassis, your module will look different.

Before you begin

Read the following cautions and notices before replacing the chassis.
CAUTION:
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection. For additional information, see the
documentation that shipped with your system.
CAUTION:
Be sure to follow these instructions carefully. If the procedures are
done improperly or out of sequence, it is possible to lose data
or damage equipment.
IMPORTANT:
Schedule a maintenance window of approximately 60 minutes to
complete this procedure.
IMPORTANT:
Before beginning these procedures, verify that there is a known,
good backup of the system. Backup all volumes and, for the
MSA1510i, record the iSCSI and Management settings.
TIP:
Before beginning these procedures, label all cables. This ensures
that they are reconnected correctly.
Page 1