HP StorageWorks 2/140 - Director Switch Uwaga dotycząca wydania - Strona 8

Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Przełącznik HP StorageWorks 2/140 - Director Switch. HP StorageWorks 2/140 - Director Switch 24 stron. Director power cord advisory instruction
Również dla HP StorageWorks 2/140 - Director Switch: Uwaga dotycząca wydania (27 strony), Instrukcja instalacji (22 strony), Uwaga dotycząca wydania (20 strony), Uwaga dotycząca wydania (13 strony), Uwaga dotycząca wydania (11 strony), Uwaga dotycząca wydania (10 strony), Instrukcja (1 strony)

Supported Configurations

Operation of multiple switches in a fabric topology is subject to the following

topology limits. Consider the impact of these limits when planning the fabric.

Note:

High Availability Planning Guide

Note:

path, not the total number of ISL connections between devices.

For more information about planning the fabric, refer to

Fabric Elements – Each fabric element is defined by a unique domain ID that

ranges between 1 and 31; therefore, the theoretical limit of interconnected

directors in a single fabric is 31. The supported limit of interconnected

switches in a single fabric is 24. Because this number is subject to change,

contact your HP authorized service representative for the current number of

interconnected switches supported in a single fabric.

Inhomogeneous fabric – To determine if interoperability is supported for a

product, or if restrictions apply, refer to the product publications, or contact

your HP authorized service representative.

Number of Interswitch Links (ISLs) – The maximum supported number of

ISLs is 75% of installed ports for the director 2/64, and 50% of installed ports

for the director 2/140. For redundancy, at least two ISLs should connect any

two director-class fabric elements. Because this number is subject to change,

contact your HP authorized service representative for the current number of

ISLs supported per director.

Hop Count – The Fibre Channel theoretical limit of ISL connections

traversed (hop count) in a single path through a fabric is 7. The maximum

supported hop count in a single path through a fabric is 3. Because this

number is subject to change, contact your HP authorized service

representative for the current hop count supported by a single fabric path.

The hop count is equal to the number of ISL connections traversed in a single

HP StorageWorks SAN

Director Release Notes