HP StorageWorks 2/24 - Edge Switch Uwaga dotycząca wydania - Strona 7

Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Przełącznik HP StorageWorks 2/24 - Edge Switch. HP StorageWorks 2/24 - Edge Switch 10 stron. Fw 04.01.02 and sw 06.03.01 ha-fabric manager release notes
Również dla HP StorageWorks 2/24 - Edge Switch: Uwaga dotycząca wydania (32 strony), Uwaga dotycząca wydania (27 strony), Podręcznik (26 strony), Uwaga dotycząca wydania (19 strony), Uwaga dotycząca wydania (16 strony), Uwaga dotycząca wydania (17 strony)

Known Issues

This section describes the known issues related to HAFM software.

Link Incident Alerts Do Not Display in Port List View

Link Incident alerts (yellow triangle) do not display in the Alert column of the

table displayed in the Product Manager Port List view for any of the managed

Edge Switch or Director products. All other link incident alerts function normally.

This will be corrected in a future release of HAFM.

Attached Ports/Nodes Panel May Be Blank When Editing a Zone

Occasionally the Attached ports/nodes panel on the left of the HAFM Modify

Zone window may be blank when first opened to edit a zone. Selecting another

fabric from the Fabric drop-down list will activate the panel to display attached

ports and nodes.

Port Pop-up Menu May Be Blank

Occasionally when a right-click is applied to the graphic display of a port in the

Port Card view for a Director 2/140 port card, the pop-up menu may be blank. If

this occurs, perform an additional right-click to the graphic display of the port to

view the contents of the pop-up menu. Alternatively, you can choose the desired

port with a left-click, and then choose Product > Port on the menu bar.

Open Systems Management Server

Under the HAFM Product Manager > Hardware View menus, the Configure >

Management Server. . .menu option will result in a pop-up dialog. This dialog

states "This feature has not been installed. Please

contact your sales representative." This feature is not currently

available.

Using the Same Firmware

All switches and directors managed by HAFM should have the same FW level

installed—whether 1 Gbps or 2 Gbps capable.

HA-Fabric Manager Release Notes

Known Issues