HP StorageWorks 2/8V - SAN Switch Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik HP StorageWorks 2/8V - SAN Switch. HP StorageWorks 2/8V - SAN Switch 6 stron. Hp storageworks san switch rack mount kit installation instructions (a7511-90904, june 2009)
Również dla HP StorageWorks 2/8V - SAN Switch: Aktualizacja instrukcji (9 strony), Instrukcja instalacji (20 strony), Uwaga dotycząca wydania (48 strony)
Drukuj stronę
HP StorageWorks
SAN Switch rack mount kit
installation instructions
© Copyright 2004-2009 Hewlett-Packard Development Company,
L.P.
Eighth edition: June 2009
The information in this document is subject to change without notice.
Printed in the US
www.hp.com
A7511-90904
About this document
This document describes how to use the SAN Switch Rack Mount Kit
(part number A7511A) to rack mount SAN switches and routers.
Supported devices
Use the SAN Switch Rack Mount Kit to install the following switch models:
•
SAN Switch 2/8V
•
SAN Switch 2/8
•
SAN Switch 2/8-EL
•
SAN Switch 2/16V
•
SAN Switch 2/16
•
SAN Switch 2/16N
•
SAN Switch 2/32
•
SAN Switch 4/32
•
SAN Switch 4/32B
•
4/8 SAN Switch
•
4/16 SAN Switch
•
4/64 SAN Switch
•
8/8 SAN Switch
•
8/24 SAN Switch
•
8/40 SAN Switch
•
8/80 SAN Switch
•
FCoE Converged Network Switch
•
Encryption SAN Switch
•
Multi-protocol (MP) Router
•
400 Multi-protocol (MP) Router
Supported HP custom racks
Use the SAN Switch Rack Mount Kit with the following HP StorageWorks
custom racks only:
•
HP 9000 Series Rack
•
HP 10000 Series Rack
•
HP 10000 G2 Series Rack
•
HP System/e Rack
NOTE:
In this document, "HP 10000 Series Rack" refers to both the HP
10000 Series Rack and the HP 10000 G2 Series Rack.
Related documentation
For the latest B-series switch product documentation, see the storage
section on the following HP website:
http://www.hp.com/support/manuals
Page 1