HP StorageWorks director 2/140 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik HP StorageWorks director 2/140. HP StorageWorks director 2/140 24 stron. Universal port module kit
Również dla HP StorageWorks director 2/140: Instrukcja instalacji (22 strony)

Drukuj stronę

HP StorageWorks director 2/140 Instrukcja instalacji

This chapter describes the procedures used for installing a Universal Port Module

(UPM) kit into a Director 2/64 or a Director 2/140. For each UPM kit to be installed,

perform the following procedures to:

•

Remove the UPM filler blank

•

Install the UPM

Supported Kits

HP sells the StorageWorks Director 2/64 with a base configuration of 32 Fibre Channel

ports and the StorageWorks Director 2/140 with a base configuration of 64 Fibre

Channel ports. HP also sells optional kits to increase the number of ports to a

maximum of 64 for the Director 2/64 and a maximum of 140 for the Director 2/140.

Use the procedures described in this chapter for the following director UPM kits:

•

8-Port UPM Kit, 300833-B21 (A6574B)

— (2) Short-wave-4-Port cards, includes (8) short-wave 2 Gbps SFP optical

transceivers

— (1) Loop back plug (multi-mode/short wave)

— (1) Port card installation instructions

— (1) Warranty

•

4-Port UPM Kit, 286808-B21

— (1) Short-wave-4-Port card, includes (4) short-wave 2 Gbps SFP optical