HP Xw460c - ProLiant - Blade Workstation Przegląd - Strona 29

Przeglądaj online lub pobierz pdf Przegląd dla Przełącznik HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 stron. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Również dla HP Xw460c - ProLiant - Blade Workstation: Podręcznik wdrażania (35 strony), Podręcznik zapobiegania błędom (12 strony), Biała księga techniczna (12 strony), Aktualizacja oprogramowania sprzętowego (9 strony), Instrukcja instalacji (2 strony), Podręcznik często zadawanych pytań (14 strony), Plakat konfiguracji (9 strony), Instrukcja instalacji (33 strony), Podręcznik zarządzania (28 strony), Instrukcja obsługi sprzętu (23 strony), Podręcznik użytkownika (33 strony), Podręcznik optymalizacji (13 strony), Ograniczona gwarancja (10 strony), Instrukcja instalacji (10 strony), Instrukcja instalacji (8 strony), Instrukcje instalacji (4 strony), Instrukcje instalacji (2 strony)

available in the technology brief entitled ―Managing the HP BladeSystem c-Class‖:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00814176/c00814176.pdf

Dynamic Power Saver mode

Most power supplies operate more efficiently when heavily loaded and less efficiently when lightly

loaded. Dynamic Power Saver mode provides power load shifting for maximum efficiency and

reliability. Dynamic Power Saver technology maximizes power supply efficiency to reduce operating

costs. Power supply efficiency is simply a measure of DC watts output divided by AC or DC watts

input. At 50% efficiency, 2000W input would yield 1000W output. The difference is costly wasted

energy that generates unnecessary heat.

Dynamic Power Saver mode is active by default since it saves power in the majority of situations.

When enabled, Dynamic Power Saver runs the required power supplies at a higher use rate and puts

unneeded power supplies in standby mode. A typical power supply running at 20% load could have

an efficiency rating as low as 60%. However, at 50% load, the efficiency rating could be up to 92%,

providing a significant savings in power consumption.

In the first example in Figure 21, without Dynamic Power Saver, power demand is low and spread

inefficiently across six power supplies. In the second example, with Dynamic Power Saver active, the

power load is shifted to two power supplies for more efficient operation. The remaining power

supplies are placed in a standby condition. When power demand increases, the standby power

supplies instantaneously deliver the required extra power. This enables the power supplies to operate

at optimum efficiency, with no effect on redundancy.

Figure 21. Example of power efficiency with and without Dynamic Power Saver

Dynamic Power Saver is enabled by the BladeSystem Onboard Administrator module. When

enabled, this feature monitors the total power consumed by the enclosure in real-time and

automatically adjusts for changes in demand.