AQUATERR INSTRUMENTS EC-300 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe AQUATERR INSTRUMENTS EC-300. AQUATERR INSTRUMENTS EC-300 11 stron.

It is important to read these

M, T & EC -300 meters.

Always know what you are probing into. Be careful not to probe into power lines, drip tubing,

gas lines, and other objects that may be invisible from the surface.

Do not try to force the probe into rock or hard soil. The handle is provided to help in probe

removal, forcing may result in bending or breaking the probe or cause damage to the

sensing area. Sharp rocks can damage the sensor. To determine the moisture content of

areas with a hard cracked surface, first break through the hard layer with a shovel, and then

insert the probe, If the ground is still too hard, use an auger or a pipe to create the hole.

Do not hit the meter end. This may result in loss of calibration or destruction of your meter.

Do not cut the roots of plants, if avoidable. Insert the probe with the flat edges parallel to the

roots. Test the soil under plants by inserting the probe at an angle. Be especially careful of

the tap root, the major root running directly under the plant.

Do not leave the probe in the soil. If the probe is left in the ground, it can loose intimate

contact with the soil resulting in incorrect reading.

Guidebook

The Aquaterr Instruments Guidebook explains how to use your meter to optimize your

irrigation practices by helping you to look at the relationship between plants, soil and moisture.

SAFETY PRECAUTIONS

before using the