Diamond Products CC1600 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Diamond Products CC1600. Diamond Products CC1600 16 stron. Wall saw

Saw does not move

past track joints.

No water at blade.

Poor cutting

performance.

Loss of gear oil or

water present in

pivoting arm

Tracks are not aligned.

Tracks are warped.

Saw rollers too tight.

Water valve is shut.

Water hose not

connected properly.

Low water pressure.

Defective saw motor.

Blade is glazed.

Defective power unit.

Defective seals in

support blade guard

mount

Mount tracks

correctly, using jack

screws to correct

alignment.

Readjust rollers until

saw travels past joint

properly.

Check water supply.

Check hose

connections.

Check water pressure

(min. 15 psi)

Replace saw motor.

Dress blade.

Check power unit.

Replace water seals