Diamond Products CC1600 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Diamond Products CC1600. Diamond Products CC1600 16 stron. Wall saw

Saw only (1:1 blade drive ratio)

Saw + Lamina motor

P-T Saw + Cross motor

Track (With stiffener), per ft.

Track (Without stiffener), per ft.

Std. 3.8 hydraulic motor rated at 2500 psi (172 bar), wt 18 lb. (8.2 kg.)

Opt. 5.2 hydraulic motor rated at 2500 psi (172 bar), wt 19 lb. (8.6 kg.)

Travel: Hydraulic Travel motor rated at 1500 psi (103 bar)

Spinning the blade faster than the manufacturer's recommended

speed can damage the blade and cause serious personal injury.

Some manufacturers mark the maximum safe RPM on the blade.

TECHNICAL DATA

16.8

15.8

18.4

Chapter 2

11.4

WARNING!

17.3

6.4

3.6

87 lb. (37.2 kg)

90 lb. (38.5 kg)

118 lb. (49.9 kg)

10.9 lb. ( 4.9 kg)

4.9 lb. (2.2 kg)

1.0

6.4