AQUATHERMA URBAN BOREAL Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wanna z hydromasażem AQUATHERMA URBAN BOREAL. AQUATHERMA URBAN BOREAL 16 stron.

CLOSING PROCEDURES

Technical Module

For the technical module

Using the wet/dry sweeper, suck up the trapped water in the

technical module's components.

Pump

Unscrew and remove the drain plug on the front of the pump

(turbine). Vacuum the remaining water. Store the plug dry.

Pump strainer

Unscrew and remove:

- the transparent cover

- the basket

- the drain plug beneath the strainer

Vacuum the remaining water. Close the cover of the strainer

and store the baskets and plugs dry.

Strainer cover(s)

Strainer basket(s)

Filter

Remove the cover of the filtration system and the cartridge.

Clean and store the cartridge in a dry place.

Vacuum the remaining water at the bottom of the filter

cylinder. Close the cover of the filter cylinder.

Vacuum the remaining water through the pipe connections at the

pump inlet and the filter outlet.

Tighten all pipe connections to prevent rodents from getting in

during the winter.

Cartridge

filter

Close the technical module cover and place a tarpaulin over it to

protect it from water.