Panasonic et-jpc100be Instrukcja instalacji - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Panasonic et-jpc100be. Panasonic et-jpc100be 28 stron.

Installation (continued)

Adjusting the projection position

This section describes determining the projection position by adjusting the orientation of the main unit of the pro-

jector.

Ball joint ﬁ xing screws

Rotating ﬁ xing screw

2) Adjust the orientation of the main unit.

 Align the ball joint moving part to the angle at which you want the main unit to be tilted and then adjust the

orientation of the main unit.

Ball joint ﬁ xing

screws

Rotating ﬁ xing screw

Shaft holder

Main unit

Power supply unit

Main unit

Ball joint movable part

360°

1) Loosen the ﬁ xing screw of the projector.

 Loosen the rotating ﬁ xing screw and the two

ball joint ﬁ xing screws of the projector with

the allen wrench (3.0 mm [1/8"] across ﬂ ats)

supplied with the projector.

 When you loosen the rotating ﬁ xing screw, the

shaft holder can rotate 360°.

Turn the ball joint moving part to the angle at

which you want the main unit to be tilted.

ENGLISH - 25