Panasonic et-jpc100be Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Panasonic et-jpc100be. Panasonic et-jpc100be 28 stron.

Read this ﬁ rst! (continued)

CAUTION

Do not install this product in a location where salt damage occurs or corrosive gas is generated.

Doing so may may cause falling due to corrosion.

Do not use the projector together with dimmers such as a light controller.

Doing so will result in the damage to the components inside the projector and will cause ﬁ re.

Do not put excessive force on the projector by hanging on the projector or dangling any object.

Doing so will result in falling of the projector and injuries.

Mount this product in the speciﬁ ed orientation to a ﬂ at ceiling or a ceiling with a slope of up to 45°.

Mounting this product to an inappropriate surface such as to a wall, ﬂ oor, or ceiling with a steep slope or

mounting it in the wrong orientation may cause a falling accident.

Install the ceiling mount screws and bolts so that they do not touch any metal inside the ceiling.

If they touch metal inside the ceiling, a ﬁ re or electric shock may result.

When disconnecting the power cord, be sure to hold the power connector.

If the power cord itself is pulled, the lead will become damaged, and ﬁ re, short-circuits or serious electric

shocks will result.

Authorized Representative's name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Center

Winsbergring 15, 22525 Hamburg, Germany

 Panasonic disclaims all liability for any accidents or any damage caused by the installation



of the ceiling mount bracket using methods that are not described in these Installation

Instructions or methods that do not use the parts speciﬁ ed in these Instructions.

 If products are no longer being used, they should be dismantled and removed by the



certiﬁ ed personnel as soon as possible.

ENGLISH - 3