Panasonic PT-AE500 Instrukcja obsługi - Strona 26
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Panasonic PT-AE500. Panasonic PT-AE500 30 stron.
Before calling for service
Before calling for service, check the following points.
Problem
Power does not
B The power cord may not be connected.
turn on.
B The MAIN POWER switch is turned off.
B The main power supply is not being supplied to the
wall outlet.
B TEMP indicator is illuminated or flashing.
B LAMP indicator is illuminated or flashing.
B The lamp unit cover has not been securely installed.
No picture
B The video signal input source may not be
appears.
connected properly.
B The input selection setting may not be correct.
B The "BRIGHT" adjustment setting may be at the
minimum possible setting.
B The shutter function may be in use.
B The lens cover may still be attached to the lens.
The picture is
B The lens focus may not have been set correctly.
fuzzy.
B The projector may not be at the correct distance
from the screen.
B The lens may be dirty.
B The projector may be tilted too much.
B "COLOR" or "TINT" adjustment may be incorrect.
COLOR is too
B The input source which is connected to the
light or TINT is
poor.
projector may not be adjusted correctly.
B The batteries may be weak.
The remote
B The batteries may not be inserted correctly.
control unit
B The remote control signal receptor on the projector
does not
may be obstructed.
operate.
B The remote control unit may be out of the operation range.
B The signal format ("TV-SYSTEM") may not be set correctly.
The picture does
B There may be a problem with the video tape or
not display
other signal source.
correctly.
B A signal which is not compatible with the projector
may be being input.
B The cable may be too long.
Picture from
B The external video output for the laptop computer
computer does
not appear.
may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10] keys
simultaneously. The actual method varies depending
on the type of computer, so refer to the documentation
provided with your computer for further details.)
50-E
NGLISH
Possible cause
Cleaning and maintenance
Before carrying out cleaning and maintenance, be
Page
sure to disconnect the power cord plug from the
–
wall outlet.
–
–
Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount
44
of neutral detergent in it, squeeze the cloth very well, and then wipe the
cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
45
chemically-treated cloth, read the instructions supplied with the cloth before
–
use.
–
Do not wipe the lens with a cloth that is dusty or which produces lint.
23
If any dust or lint gets onto the lens, such dust or lint will be magnified and
36
projected onto the screen. Use a blower to clean any dust and lint from the
lens surface, or use a soft cloth to wipe off any dust or lint.
41
–
23
17
–
17
36
–
–
21
21
21
38
–
54
–
–
E
-51
NGLISH