Panasonic PT-D6000E Instrukcja obsługi - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Panasonic PT-D6000E. Panasonic PT-D6000E 42 stron. Dlp based projector commercial use

Drukuj stronę

1. Replacing the Lamp Unit

Remote control operation

Switching the input signal

You can use the remote control to switch

the signals that are being input and

projected.

Stopping the projection

If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is

available that allows the user to hide images temporarily.

Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.

Clearing the on-screen menu

Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.

Press the ON SCREEN button again to displays

Changing the picture aspect ratio

You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the

ASPECT button is pressed.

 Appearance sample

S-VIDEO signal

 VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO

NOTE:

• The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is

in the provided CD-ROM.

Displaying the internal test pattern

The projector has 7 types of internal test patterns to check the condition of the set.

1. Display an input signal image.

2. Press the TEST PATTERN button.

3. Press I H to select the required test pattern.

NOTE:

• See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM.

NGLISH - 22

Switches to RGB 1 IN.

RGB1

Switches to RGB 2 IN.

RGB2

Switches to DVI-D IN.

DVI-D

Switches to VIDEO IN.

VIDEO

Switches to S-VIDEO IN.

S-VIDEO

Switches to SDI IN.

SDI

*1. SDI is only for PT-DZ6710E.