Panasonic PT-DS100XE ( ) Specyfikacje - Strona 4

Przeglądaj online lub pobierz pdf Specyfikacje dla Projektor Panasonic PT-DS100XE ( ). Panasonic PT-DS100XE ( ) 6 stron. Pt-dz110x series 3-chip dlp projector

Drukuj stronę

Enhanced Installa-

tion Flexibility

Flexible Installation

The wide adjustment

range of the powered

horizontal/vertical lens

shift function assures

virtually distortion-free

images and adds con-

venience and versatil-

ity. It lets you easily make adjustments with the

remote control. The unit can also be rotated 360°

vertically. This means you can install it at any

angle you want, to accommodate different instal-

lation conditions. The lens-centred design also

contributes to easy installation.

Geometric Adjustment

for Specially

Shaped Screens

This function adjusts the image for projection

onto spherical, cylindrical and other specially

shaped screens. You can make the adjustment

easily using just the remote control, with no exter-

nal equipment needed. Used together with the

multi-screen support system, Geometric Adjust-

ment expands your application possibilities, letting

you create a wide range of image effects for digit-

al signage, concerts, performances and other spe-

cial events.

Multi-Screen Support System

Seamlessly Connects Multiple Screens

•

Edge Blending

The edges of adjacent screens can be blended

and their luminance controlled.

•

Color Matching

This function corrects for slight variations in the

colour reproduction range of individual projec-

tors. The PC software assures easy, accurate

control.

•

Multi-Screen Processor

The PT-DZ110X Series can project large, multi-

screen images without any additional equip-

ment. Up to 100 units (10 × 10) can be edge-

blended at a time.

Colour matching

Edge blending

Source

PT-DZ110X Series

Multi-Unit Brightness Control

This function automatically corrects the brightness

ﬂuctuations that occur over time in the individual

projectors of a multi-screen system. A maximum

Conventional Projector

At the time when the projectors are installed (A)

360°

After a certain time has passed (B)

Brightness

(A)

Multi Projector Monitoring & Control

Software Ver. 2

Panasonic's original freeware "Multi Projector

Monitoring & Control Software Ver. 2" allows the

user to control and monitor multiple projectors at

the same time over a wired LAN. When a problem

occurs, an alarm message is sent to the monitor-

ing/controlling PC.

Web Browser Control

The PT-DZ110X Series can be easily operated

remotely over a LAN network, because it is all

done using the computer's familiar web browser.

Furthermore, the projector sends an e-mail mes-

sage to notify the operator when an error has

occurred, or a lamp needs to be replaced.

With edge blending

LAN

Without edge blending

Overlapping image edges

PJLink™ Compatibility

The LAN terminals support PJLink™ class 1 con-

nection. Control with the same speciﬁcations is

also possible when used in a multi-projector sys-

tem with projectors of another brand.

Projector 1

Projector 2

Projector 1

Projector 2

Image from the

projector 1

Brightness

fluctuations occur.

Image from the

projector 2

Time

( B)

PT-DZ110X

Series

remote control

LAN

e-mail

Internet

e-mail

of eight projectors can be controlled by connecting

each other via a hub, and this can be increased

to a maximum of 2,048 projectors by using "Multi

Projector Monitoring & Control Software Ver. 2".

Multi-Unit Brightness Control "ON"

At the time when the projectors are installed (A´)

Projector 1

Projector 2

After a certain time has passed (B´)

Projector 1

Projector 2

Brightness

Preset

brightness

Images from the

projector 1 and 2

(A´ )

( B´ )

A Wide Selection of Lenses

Choose from a wide lineup of lenses for your sys-

tem, including short-throw, long-throw zoom and

ﬁxed-throw lenses for rear projection use. The

additional lenses make it easy to adapt your pro-

jector to the installation site. The lenses attach

and detach with one-touch ease.

Multiple Terminals with HD-SDI

Compatibility

The PT-DZ110X Series has an array of terminals,

including a DVI-D (HDCP compliant), to support a

broad range of projection needs. Using the serial

terminal (RS-232C), it is possible to connect and

operate AMX and Crestron control systems with

ease. In addition, the PT-DZ110XE and

PT-DS100XE accommodate the HD/SD-SDI input

signals that are widely used in broadcasting.

Direct Power Off

The cooling fan continues to operate even when

the main power switch is turned off after projec-

tion is ﬁnished. This also allows the power to be

turned off by directly switching off the room's

main breaker for systems, such as ceiling mount-

ed systems, where the main power switch cannot

be reached.

Scheduling Function

Scheduled operation is possible using the built-in

timer function, without having to use a PC and

software. For example, when using the projector

for digital signage in a store, it can be set to

operate with two lamps in the daytime and one

lamp at night.

NOTES

* 7 Featured on the PT-DZ110XE and PT-DS100XE

only. * 8 Featured on the PT-DZ110XE and

PT-DS100XE only.

Time

(optional)