Panasonic PT-DW10000E Broszura - Strona 6

Przeglądaj online lub pobierz pdf Broszura dla Projektor Panasonic PT-DW10000E. Panasonic PT-DW10000E 6 stron. Full-hd dlp™ system projector with 10,000 lumens of brightness

Drukuj stronę

Specifications

DLP™ chip Panel size
0.95" diagonal (16:9 aspect ratio)
Display method
DLP ™ chip x 3 (R, G, B), DLP ™ projection system
Pixels
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Lamp
250 W UHM ™ lamp x 4 (four lamp system)
Brightness
10,000 lumens (four-lamp operation mode)
Contrast ratio
5,000:1 (full on/full off, in Dynamic iris 3 mode)
Resolution RGB
1,920 x 1,080 pixels
(1,600 x 1,200 pixels compatible, compression mode)
Video
560 TV lines
Lens
Optional powered zoom/focus lenses
Screen size
70 - 600 inches, 16:9 aspect ratio
(70 - 300 inches, 16:9 aspect ratio with the ET-D75LE5)
Lens shift
Vertical, Horizontal ( powered)
RGB input scanning frequency
f
15-100 kHz, f
H
Dot clock 20-162 MHz
Component signal
480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i,
1080/50i, 1080/50p, 1080/60p
Video signal
f
15.75/15.63 kHz, f
H
(NTSC,NTSC4.43,PAL,PAL60,PAL-N,PAL-M,SECAM)
Terminals VIDEO IN
BNC x 1, 1.0 Vp-p
VIDEO OUT
BNC x 1, 1.0 Vp-p
S-VIDEO IN
Mini DIN 4-pin x 1
RGB1/YP
P
IN
BNC x 5
B
R
RGB2 IN
D-sub HD 15-pin x 1
DVI-D IN
24-pin x1, DVI 1.0 compliant, HDCP compatible
SERIAL IN
D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
SERIAL OUT
D-sub 9-pin male x 1 (RS422 x 1)
REMOTE 1 IN
M3 jack x1 for wired remote control
REMOTE 1 OUT
M3 jack x1 for link control
REMOTE 2 IN
D-sub 9-pin female x 1 for external control (parallel)
LAN
RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
±40˚ (±22˚ with the ET-D75LE5, ±28˚ with the ET-D75LE6)
Keystone correction range
Installation
Front/rear, ceiling/floor
Power cord length
3.0 m (9.9'')
Power supply
220-240 V, 15 A, 50 / 60 Hz
Power consumption
1,450 W (25 W in standby mode with fan stopped)
Dimensions (W x H x D)
578 x 320 x 643 mm
(22-3/4'' x 12-19/32'' x 25-5/16'') (without lens)
Weight
32 kg (70.5 lbs) without lens
Operating temperature
0 -45 ˚C (32 -113 ˚F)
*The highland mode is for use at high altitudes. When using the unit at altitudes
of 1,400 to 2,700 meters, the ambient temperature is 0 ˚C-40 ˚C.
Operating humidity
10-80% (no condensation)
Supplied accessories
Power cord, Wireless/wired remote control unit,
Batteries for remote control (3V AA battery x2)

Projection distance

ET-D75LE1
1.4-1.8:1
min.
max.
70''
2.1 m / 6.9
2.7 m / 9.0
100''
3.0 m / 9.9
3.9 m / 13.1
6.1 m / 19.9
8.0 m / 26.5
200''
300''
9.2 m / 30.0
12.1 m / 40.0
400''
12.2 m / 40.1
16.2 m / 53.4
600''
18.4 m / 60.2
24.4 m / 80.3
NOTES ON USE
Notes on Projector Placement and Operation:
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings.
3. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated below between them.
These space requirements also apply to installations where only one projector unit is operating at one time
and the other unit is used as a backup.
4. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector
is between 0˚C and 35˚C. Also make sure the projector's intake and exhaust openings are not blocked.
Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings.
5. Because the ET-D75LE5 is a fixed short-throw lens, the lens shift function cannot be used with it.
24-120 Hz
V
50/60Hz
V
ET-D75LE2
ET-D75LE3
1.8-2.8:1
2.8-4.6:1
min.
max.
min.
2.9 m / 9.2
4.2 m / 13.8
4.3 m / 13.9
4.1 m / 13.3
6.0 m / 19.9
6.1 m / 20.0
8.2 m / 26.8
12.2 m / 40.1
12.3 m / 40.2
12.3 m / 40.3
18.4 m / 60.3
18.5 m / 60.5
16.4 m / 53.8
24.5 m / 80.6
24.6 m / 80.7
24.7 m / 80.8
36.9 m / 121.1
37.0 m / 121.2
Dimensions
Shape of the power outlet connection
• AC 220-240V, 16A
ET-D75LE4
4.6-7.4:1
max.
min.
max.
7.0 m / 23.2
7.2 m / 23.3
11.3 m / 37.3
10.1 m / 33.4
10.2 m / 33.5
16.2 m / 53.4
20.4 m / 67.2
20.6 m / 67.3
32.6 m / 107.2
30.8 m / 101.0
30.9 m / 101.1
49.0m / 160.9
41.1 m / 134.8
41.2 m / 134.9
65.4 m / 214.7
61.7 m / 202.4
61.8 m / 202.6
98.2 m / 322.2
Operating the Projector Continuously:
1. If the projector is to be operated continuously 24 hours a day, use the multi-lamp optical system's
alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours
a day in four-lamp operation mode,but it will automatically operate with three lamps for 8 hours of the
24 hours.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The projector uses a high-voltage mercury lamp that contains high internal pressure.
This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
578 (22-3/4'')
• AC 220-240V, 13A/15A
ET-D75LE8
ET-D75LE6
7.3-13.8:1
0.9-1.1:1
min.
max.
min.
11.1 m / 36.4
21.1 m / 69.3
1.4 m / 4.6
16.1 m / 52.6
30.3 m / 99.5
2.1 m / 6.7
32.5 m / 106.3
61.0 m / 200.3
4.1 m / 13.5
48.8 m / 160.1
91.7 m / 301.0
6.2 m / 20.2
65.2 m / 213.9
122.5 m / 401.8
8.3 m / 27.0
98.0 m / 321.4
183.9 m / 603.3
12.4 m / 40.6
Please contact Panasonic or your dealer for a demonstration.
JQA-1617
unit: mm [inch]
[meters/feet]
ET-D75LE5
0.7:1
max.
fixed
1.6 m / 5.4
1.0 m / 3.3
2.4 m / 7.8
1.4 m / 4.9
4.8 m / 16.0
3.0 m / 10.0
7.3 m / 24.1
4.6 m / 15.2
9.8 m / 32.2
—
14.8 m / 48.5
—