Panasonic PT-DZ10K Plik specyfikacji - Strona 10
Przeglądaj online lub pobierz pdf Plik specyfikacji dla Projektor Panasonic PT-DZ10K. Panasonic PT-DZ10K 18 stron. 3-chip dpl projector
Również dla Panasonic PT-DZ10K: Broszura (8 strony)
Drukuj stronę
S
F
P
E
C
I
L
3-Chip DLP
™
Projector
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
•
When the lens except the ET-D75LE6 is mounted
(Width of
0.2H
projected image)
Standard postition of projected image
NOTE: Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Vertical direction in portrait mode with the
ET-LAD320P/LAD320PW mounted
The projector may be installed at a vertical
angle of ±15°.
NOTE: The projector cannot be vertically installed all by itself. Also, the terminal side must face downward when vertically installed.
As of April 2013
SFD12M023
E
H
0.2H
•
When the ET-D75LE6 is mounted
(Width of
0.15H
projected image)
Standard postition of projected image
• Horizontal direction
The projector may be installed at a horizontal
angle of ±15°.
• Horizontal direction in portrait mode with
the ET-LAD320P/LAD320PW mounted
The projector may be installed at a horizontal
angle of ±15°.
PT-DZ10K
H
0.15H
1 0 / 1 7