Panasonic PT-DZ12000U - WUXGA DLP Projector Instrukcja konfiguracji i obsługi - Strona 29
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji i obsługi dla Projektor Panasonic PT-DZ12000U - WUXGA DLP Projector. Panasonic PT-DZ12000U - WUXGA DLP Projector 37 stron. 3-chip dlp projector
Również dla Panasonic PT-DZ12000U - WUXGA DLP Projector: Broszura i specyfikacje (6 strony)
Drukuj stronę
Warning/Error Generating Conditions
When a warning or error is detected, the projector unit will be set to the following status.
Detected warning/error
Temperature warning
Temperature error
Lamp warning
Lamp error
Filter warning
Filter error
Other warning
Other error
For further details, refer to the operation manual of the projector.
Intake temperature, exhaust temperature or optical module temperature is high.
Optical module temperature is low.
Intake temperature, exhaust temperature or optical module temperature is high.
Optical module temperature remained low for a certain time duration.
Intake temperature, exhaust temperature or optical module sensor is disconnected.
Lamp replacement time has been reached.
Lamp replacement is overdue, lamp illumination failed, lamp is not installed, or lamp is
malfunctioning.
Low remaining amount of ARF.
Filter is clogged, ACR/ARF is not installed, filter winding failed,
or there is no remaining ARF.
—
Lamp unit cover remaining open, fan error, shutter error, aperture error, color wheel error,
ACR/ARF not installed, filter cleaning process time-out, DC voltage error, lens shift error,
internal clock battery replacement required, no response from internal IC, software version
check error, microcomputer software error, microcomputer internal error, etc.
Projector status
29