Panasonic PT-DZ13K Broszura - Strona 5
Przeglądaj online lub pobierz pdf Broszura dla Projektor Panasonic PT-DZ13K. Panasonic PT-DZ13K 8 stron. Pt-dz13k series 3-chip dlp projectors
Drukuj stronę
Multi-Screen Support System
Seamlessly Connects Multiple
Screens
• Edge Blending
The edges of adjacent screens can be
blended and their luminance controlled.
• Color Matching
This function corrects for slight variations in
the color reproduction range of individual
projectors. The PC software assures easy,
accurate control.
• Multi-Screen Processor
The PT-DZ13K Series can project large,
multiscreen images without any additional
equipment. Up to 100 units can be
edgeblended at a time.
Color matching
Source
PT-DZ13K Series
Without edge blending
With edge blending
Overlapping image edges
Portrait Mode Capability (optional)
Portrait projection is possible by mounting
the optional ET-LAD320P or ET-LAD320PW
lamp units, updating
the projector's
firmware to MAIN
Ver. 2.00 or later,
and installing the
projector with its
terminal side
surface facing
downward.
Multiple Terminals with HD-SDI
Compatibility
The PT-DZ13K Series has an array of
terminals, including two SDI (Dual Link
HD-SDI, 3G SDI and HD SDI),*
DVI-D and HDMI terminals.
Multi Projector Monitoring & Control
Software Ver. 2.8
Panasonic's original Multi Projector
Monitoring & Control Software Ver. 2.8
freeware lets you control and monitor
multiple projectors at the same time over a
wired LAN. If a problem occurs, an alarm
message is sent to the monitoring/
controlling PC.
Web Browser Control
The PT-DZ13K Series can be easily operated
remotely over a LAN network, because it is
all done using the computer's familiar web
browser. Furthermore, the projector sends
an e-mail message to notify the operator
when an error has occurred, or a lamp
needs to be replaced.
be replaced.
PT-DZ13K
Series
PC
Edge blending
LAN
PC
Other Valuable Features
her Valuable Features
• PJLink™ compatibility
• P-in-P function*
• Mechanical lens shutter with fade in/out effect
• Scheduling function
• Direct power off
• 30 m long-range wireless remote control with
LED backlight
• Anti-theft features with chain opening
• Control device setup function
• ID assignment for up to 64 units
• Built-in test pattern
• Selectable 10-language on-screen menu
(English, German, French, Spanish, Italian,
*
Portuguese, Russian, Japanese, Chinese,
12
Korean)
• RoHS Directive compliant
3D sync*
,
13
14
age to ot y t e ope ato
as occurred, or a lamp
laced
remote control
PC
LAN
e-mail
Internet
PC
PC
e-mail
15
PT - DZ13K Series
The PT-DZ13K Series projector are
carefully manufactured at the Panasonic
factory in Japan, under strict quality
control. This is another, very important
advantage of a Panasonic projector.
E
Ecology-conscious Design
•
•
No halogenated flame retardants are used in the
cabinet.
•
•
Lead-free solder is used to mount components
t
to the printed circuit boards.
•
•
S
Stand-by power consumption of only 0.3 W (0.2 W
f
for 120 V AC).*
16
•
•
A
Auto Power Save activates standby mode when
n
no signal is input.
* 7
* 7
The usage environment affects the filter
maintenance cycle.
* 8
* 8
When washing with water, please follow the
procedures listed in the operating instructions.
Also, we recommend replacing the filter with a
new one after it has been washed and reused
twice. If the filter is not sufficiently clean after
washing, replace it with a new one.
* 9
With the
set to
mode. 3,500
LAMP POWER
HIGH
hours for the PT-DZ10K. With the
to
mode. The usage environment affects
NORMAL
the lamp replacement cycle.
* 10 The settings stored in memory and the projection
condition after recall may not match perfectly.
* 11 For the PT-DZ13K/DS12K only. The PT-DZ10K has
the same Geometric Adjustment function that is
featured on the previous models. The PT-DW11K
features neither of them.
* 12 Please contact the sales representative with regard to
the frame for portrait orientation. Installation is
possible only with the terminal side facing downward.
Horizontal rotation and vertical rotation are both
limited to 15 degrees. Also, the lamp replacement
cycle becomes 500 hours, and this cycle is affected
by the usage environment. In Portrait mode, the
maximum brightness becomes 10,600 lm for the
PT-DZ13K/DS12K and 9,600 lm for the PT-DW11K.
* 13 For the PT-DZ13K and PT-DS12K only. The
PT-DZ10K has one SDI connector and does not
accept dual-link HD SDI signals.
* 14 Not featured on the PT-DZ10K.
* 15 This function cannot be used with some input
signals and selected inputs.
* 16 With the standby mode set to
ECO
set
LAMP POWER
.