Diamond Tech International Diamond Laser 7000 Band Saw Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Diamond Tech International Diamond Laser 7000 Band Saw. Diamond Tech International Diamond Laser 7000 Band Saw 6 stron. Band saw

Drukuj stronę

•

Be sure the power switch is in the

OFF position before plugging in this tool.

•

Wear proper apparel. Never wear loose

clothing, gloves, neckties, or jewelry. These

articles may become caught in the saw's

moving parts.

•

Always hold material being cut firmly

against cutting table. Adjust the upper

Blade Guide so it is as close to the work

piece as possible.

•

Never turn on machine with scrap or

working material touching the blade.

•

Keep children away from this tool and

all power tools.

•

Never leave tool running unattended.

Turn power off when not in use.

A-

Band Saw

B-

Cutting Table

C-

Recirculating Water Pump

SAFETY INSTRUCTIONS

Contents

•

ALWAYS WEAR SAFETY GOGGLES.

Everyday eyeglasses have only impact

resistant lenses; they are not safety

glasses.

•

Disconnect tool before servicing.

Ensure this tool is ready to use before

plugging in.

•

Feed work material forward at a slow

easy pace into the blade. Avoid sudden

twisting of the blade; which may cause

kinking or breaking of the blade.

•

Remove all keys and wrenches before

using tool. Leaving keys and wrenches

attached while operating this tool may result

in damage to the machine and operator.

D-

Detachable Water Reservoir

Hex Wreches Wrenches (not shown)