Panasonic PT-FW430EA Instrukcja obsługi - Strona 44

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Panasonic PT-FW430EA. Panasonic PT-FW430EA 46 stron. Pt-fw430 series lcd projector
Również dla Panasonic PT-FW430EA: Specyfikacje (6 strony)

Drukuj stronę

Glossary

Item

Access point

AD HOC

AES

Default Gateway

DHCP

EAP

EAP-FAST

EAP-TTLS

EAP-TLS

GTC

(EAP-GTC)

INFRASTRUCTURE

(infrastructure

mode)

IP address

LAN

These are stations for relaying electromagnetic signals between computers

in a wireless LAN. When a computer is connected to an access point, it can

communicate through the network connected to the access point.

This is the mode in which computers communicate with each other directly,

rather than via access points.

Next generation standard cryptography standardized by the National Institute of

Standards and Technology (NIST).

AES: Advanced Encryption Standard

The devices that are used for different network standards from yours. Default

Gateway enables a connection with other network, by adjusting bilateral

differences such as communication protocols. If no gateway is specified for the

IP address of access destination, data will be sent to the host set as the default

gateway.

Abbreviation for Dynamic Host Configuration Protocol. This function

automatically assigns IP addresses to the connected equipment. If a device with

the DHCP server function is present within a LAN, it automatically assigns IP

addresses to the connected equipment.

Abbreviation of PPP Extensible Authentication Protocol. An authentication

protocol extended from PPP, which is used for user authentication for remote

access. MD5, TLS, S/Key, etc. are supported as authentication methods. This

protocol is adopted by the wireless LAN authentication standard IEEE 802.1X,

and available methods include EAP-TLS/EAP-TTLS/EAP-LEAP/EAP-PEAP/

EAP-MD5.

Abbreviation of EAP-Flexible Authentication via Secure Tunneling. It is one of

the wireless authentication methods compatible with IEEE 802.1X. It does not

require digital authentication, but establishes a tunnel for the authentication

process using a secret key cryptosystem, and authenticates the tunnel mutually

to improve security. Cisco's proprietary method.

Abbreviation of EAP-Tunneled Transport Layer Security. It is one of the wireless

authentication methods compatible with IEEE 802.1X. It performs mutual

authentication with a digital certificate by the authentication server, and ID/

password by the client. A tunnel is established for the authentication process.

Developed by Func Software in the U.S.

Abbreviation of EAP-Transport Layer Security. It is one of the wireless

authentication methods compatible with IEEE 802.1X. This authentication

method uses a digital certificate, and performs mutual authentication of client

and server using a digital certificate.

Abbreviation of EAP-Generic Token Card. It is one of the wireless authentication

methods compatible with IEEE 802.1X. Authentication is performed with ID and

password. Password is acquired from a security token.

This is the mode in which communications are performed via the access point.

Internet Protocol (IP) is a protocol for distributing data, and the address

corresponding to the data distribution destination is called the IP address. The

same IP address cannot be used within the same LAN.

Abbreviation for Local Area Network. This is a network with a relatively narrow

range such as inside a company.

Descriptions

See

page