Panasonic PT-FX400E Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Panasonic PT-FX400E. Panasonic PT-FX400E 46 stron. Pt-fw430 series lcd projector
Również dla Panasonic PT-FX400E: Specyfikacje (6 strony)

Drukuj stronę
Panasonic PT-FX400E Instrukcja obsługi
NETWORK menu (continued)

WIRED LAN

You can make detailed wired LAN settings.
1
Press ▲ ▼ to select [WIRED LAN], and press <ENTER> button.
The [WIRED DETAILED SETUP] screen will be displayed.
WIRED DETAILED SETUP
CANCEL
SELECT
ENTER
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
DHCP
_
(DHCP client function)
IP ADDRESS
_
(Display of IP address and setting)
SUBNET MASK
(Displaying and setting the subnet mask)
DEFAULT GATEWAY
(Display of gateway address and setting)
"Glossary" (
See page 44 – 45)
_
3
Press ▲ ▼◄► to select [OK], and press <ENTER> button.
Save the current network settings.
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
w Default wired LAN settings
w
The following settings are set before the projector leaves the factory.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
10
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
ON:
OFF: If a DHCP server does not exist in the network to which the
Enter the IP address if DHCP server is not used.
_
If not using a DHCP server, enter the subnet mask.
_w
Enter the gateway address if DHCP server is not used.
OFF
192.168.10.100
255.255.255.0
192.168.10.1
OFF
192.168. 10.100
255.255.255. 0
192.168. 10. 1
OK
CANCEL
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
projector is connected, additionally set [IP ADDRESS
[SUBNET MASK
] and [DEFAULT GATEWAY
_
],
_
].
_